Bronco Maniac
Sr. Member
- Joined
- Nov 14, 2010
- Messages
- 421
I got my headliner installed. I first lined the top with Hushmat. At first I did the front and back sections. You could slap the top where the Hushmat was at and it was rock solid. The center section sounded like a drum. Makes a big difference.
I then put in a layer of Duct insulation that is about 1/4" thick using 3M 77 spray adhesive.
I had ordered the headliner from Tom's. Of course it only comes in one color, white. I went to the fabric store and bought 4 yards of foam backed black headliner material. It is 54" wide. I had to wait for about four women to get their fabric cut first. The woman in front of me said she had a 50% off coupon. Mine was going to cost about $60. I asked her if she had another and she gave me a 40% off coupon. When I checked out I told the girl I had the coupon. She had a 60% off coupon. My material cost me $25.
I used Permatex spray adhesive to put the material on the headliner. Since I have a full cage and the top is on the truck, I ordered an extra bow and cut the rear piece almost in half so I could fish it over the cage.
It turned out good. I am really happy and appreciate the ones that gave me suggestions on the forum.
I then put in a layer of Duct insulation that is about 1/4" thick using 3M 77 spray adhesive.
I had ordered the headliner from Tom's. Of course it only comes in one color, white. I went to the fabric store and bought 4 yards of foam backed black headliner material. It is 54" wide. I had to wait for about four women to get their fabric cut first. The woman in front of me said she had a 50% off coupon. Mine was going to cost about $60. I asked her if she had another and she gave me a 40% off coupon. When I checked out I told the girl I had the coupon. She had a 60% off coupon. My material cost me $25.
I used Permatex spray adhesive to put the material on the headliner. Since I have a full cage and the top is on the truck, I ordered an extra bow and cut the rear piece almost in half so I could fish it over the cage.
It turned out good. I am really happy and appreciate the ones that gave me suggestions on the forum.











