• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Starting a build thread

OP
OP
jerrybromley

jerrybromley

Full Member
Joined
Sep 17, 2018
Messages
344
Thanks guys , I plan to have the body together this winter. It may be ambitious but I am retired and it keeps me out of trouble
 
OP
OP
jerrybromley

jerrybromley

Full Member
Joined
Sep 17, 2018
Messages
344
Box work

Here's another update in photos. I have replaced or repaired all the rust in and on the box area. I used angle iron to help keep the box square. I now have it setting on the frame with the 1 inch body lift in the last photo . The box was much easier to work on when I put it on a cart I built upside down . I have never had a body this far apart. I sure hope I can get it back together ;).
 

Attachments

  • 100_2131.jpg
    100_2131.jpg
    68 KB · Views: 181
  • 100_2132.jpg
    100_2132.jpg
    82.7 KB · Views: 182
  • 100_2133.jpg
    100_2133.jpg
    87.8 KB · Views: 171
  • 100_2134.jpg
    100_2134.jpg
    81.1 KB · Views: 172
  • 100_2135.jpg
    100_2135.jpg
    91.4 KB · Views: 178
  • 100_2136.jpg
    100_2136.jpg
    93.2 KB · Views: 174
  • 100_2140.jpg
    100_2140.jpg
    76.6 KB · Views: 169
  • 100_2144.jpg
    100_2144.jpg
    78.4 KB · Views: 174
Last edited:
OP
OP
jerrybromley

jerrybromley

Full Member
Joined
Sep 17, 2018
Messages
344
Motor and tranny

As I posted earlier, I decided to change to a V8 and a C-4 here are some preliminary photos . Motor mounts in and tranny set in place for mock up. I got the 289 from a friend who rebuilt it. Then took it out and beat the crap out of it and lost oil pressure . It appears he wiped some crankshaft bearings . Should be an easy rebuild . I know probably wishful thinking
 

Attachments

  • 100_2139.jpg
    100_2139.jpg
    91.8 KB · Views: 152
  • 100_2138.jpg
    100_2138.jpg
    114.9 KB · Views: 141
  • 100_2143.jpg
    100_2143.jpg
    80.3 KB · Views: 134
OP
OP
jerrybromley

jerrybromley

Full Member
Joined
Sep 17, 2018
Messages
344
Floor and cowl

My next endeavor will be trying to get the floor and cowl to line up with the box. I purchased the most complete assemblies for each I could find in hope of eliminating as many chances of misalignment as possible . If anyone has any hints as to helping with this process I am all ears
 

Attachments

  • 100_2052.jpg
    100_2052.jpg
    75.6 KB · Views: 121
  • 100_2124.jpg
    100_2124.jpg
    89.5 KB · Views: 148
OP
OP
jerrybromley

jerrybromley

Full Member
Joined
Sep 17, 2018
Messages
344
big parts

I love it when big parts start to come together

Even if it's just with 'c' clamps, vise grips and screws
 

Attachments

  • 100_2154.jpg
    100_2154.jpg
    87.8 KB · Views: 150
  • 100_2153.jpg
    100_2153.jpg
    79.5 KB · Views: 150
  • 100_2148.jpg
    100_2148.jpg
    77.1 KB · Views: 148
  • 100_2147.jpg
    100_2147.jpg
    84.3 KB · Views: 156
  • 100_2145.jpg
    100_2145.jpg
    76.6 KB · Views: 157
  • 100_2142.jpg
    100_2142.jpg
    85.2 KB · Views: 150
  • 100_2144.jpg
    100_2144.jpg
    78.4 KB · Views: 162
OP
OP
jerrybromley

jerrybromley

Full Member
Joined
Sep 17, 2018
Messages
344
Fun Fun

Now the real Fun begins. Virtually every source I have come across says this process of squaring up the doors and front end is a pain in the #$%^. So I thought I would show what I did to get things in place before I even touch a welder. I have screw jacks under the door posts and under the tunnel. The top is bolted in place with the windshield frame in place. I have ratchet straps pulling the cowl back and some more straps pulling forward to get everything in it's proper location. If ANYONE has hints or tricks that may help I am wide open to suggestions. Does anyone know if the cowl attaches to the floor brace or just the floor? My old parts are under snow.
 

Attachments

  • 100_2162.jpg
    100_2162.jpg
    88.1 KB · Views: 177
  • 100_2161.jpg
    100_2161.jpg
    88.5 KB · Views: 157
  • 100_2158.jpg
    100_2158.jpg
    90.9 KB · Views: 172
  • 100_2157.jpg
    100_2157.jpg
    95.2 KB · Views: 164
  • 100_2160.jpg
    100_2160.jpg
    104.6 KB · Views: 167

rydog1130

Contributor
Bronco Guru
Joined
Jun 19, 2014
Messages
4,188
Hey Man good to see you're still plugging away at it! Im glad to see you put your top on! Thats a big help with your doors. I would get your door posts in first and your doors lined up, then mount your rocker panels. I hope the measurements you took this summer are helping you out. The cowl/windsheild hinge panel does eventually get welded to the upper part of the door post. hit me up if have any questions! looking good!
 
Last edited:
OP
OP
jerrybromley

jerrybromley

Full Member
Joined
Sep 17, 2018
Messages
344
Hey Rvzio , I went down Bronco Graveyard to pick up some other parts ( save shipping costs) and they had it setting on the floor as a scratch and dent . A GREAT price and I think it will be big help . There are a lot of individual parts in that thing that were put together on a fixture so I assume all the angles and fitment are correct.
 
OP
OP
jerrybromley

jerrybromley

Full Member
Joined
Sep 17, 2018
Messages
344
Good to hear from ya Rydog , I was pretty sure that the cowl was welded to the floor and not the brace , but it makes the door openings easier if I could move the cowl back a little. Maybe I'll need to move the bed forward (not sure) On my first mach up I tried to put the windshield in last . It appeared the windshield was an inch too tall. So I unclamped everything bolted the windshield in first and started pushing and pulling everything into place . That's where I'm at now . It may take some time but I'll figure it out
 
Last edited:

rydog1130

Contributor
Bronco Guru
Joined
Jun 19, 2014
Messages
4,188
Those 3 holes on the bottom of the kick panel should line up with the same three holes punched at the end of the inner rocker +\- 1/4” don’t weld anything until you know it’s there! You’ll get it
 

Galt72

Contributor
Sr. Member
Joined
Apr 21, 2004
Messages
646
Mine wasn't nearly as extensive as your rebuild but I found it much easier to also have the front fenders mocked up when your trying to get the doors in place. The fenders help hold the door post straight and you'll also get to see if your door to fender gaps are right.
 
OP
OP
jerrybromley

jerrybromley

Full Member
Joined
Sep 17, 2018
Messages
344
Thanks Galt72, I think that is what I decided too. I'll have some time today to try that . More photos to come...
 
OP
OP
jerrybromley

jerrybromley

Full Member
Joined
Sep 17, 2018
Messages
344
Really ?

When I got my Bronco she was a plain jane with a six and manual everything , but look what somebody thought would look cool on her
 

Attachments

  • 100_2169.jpg
    100_2169.jpg
    57.1 KB · Views: 548
OP
OP
jerrybromley

jerrybromley

Full Member
Joined
Sep 17, 2018
Messages
344
Seriously

I made progress today and it looks more like a real Bronco instead a pile of parts. Everything is screwed or clamped ,but the door gaps look good. Now I wait on back ordered drivers door post?:? . As we all know there are plenty of things to keep me busy until it arrives . a little work on the windshield gaps and I may be ready to start welding it together
 

Attachments

  • 100_2163.jpg
    100_2163.jpg
    91.6 KB · Views: 184
  • 100_2164.jpg
    100_2164.jpg
    73.8 KB · Views: 174
  • 100_2165.jpg
    100_2165.jpg
    83.7 KB · Views: 166
  • 100_2166.jpg
    100_2166.jpg
    78.5 KB · Views: 161
Top