I have a 1978 F-150 high pinion dana 44. I put on new calipers and I had already ordered brake lines for a 1977. When I was putting it together I noticed the banjo bolt was pretty loose in the brake line. I decided to return the lines for the 1977 and ordered the ones for a 1978. Well these have the same problem(if it is one) I would guess 3/8 banjo going through a 7/16 hole in the brake line. I am use to these having a closer fit.
Should they be loose? I talked to JBG and was told there is only one caliper and these are corrd t lines. On there website they sell a banjo bolt that covers many years. The copper washers could seal it up but is everyones like this?
I also noticed you can get a caliper with plastic or stainless pistons. Maybe they use a different bolt size?
Should they be loose? I talked to JBG and was told there is only one caliper and these are corrd t lines. On there website they sell a banjo bolt that covers many years. The copper washers could seal it up but is everyones like this?
I also noticed you can get a caliper with plastic or stainless pistons. Maybe they use a different bolt size?











