Is this frame too far gone?

[saili.calvin]

Recently picked up a 72 on Ebay. Seller said the frame has 1 small rust spot. Got the truck delivered today and the frame has a ton of holes. Is this frame too far gone? https://photos.app.goo.gl/kivEUyGzLweP4EKBA and if it is within repair, what would the cost be for something like this to fix?

 

[Qumanchew]

Unfortunately that's pretty far gone. I've fixed frames before and it's a nightmare. Most of the rot is on the inside where you can't see it. When you start cutting out sections you find more rot. You end up cutting out more and more till you find good metal. I'd suggest filter going a good used frame. If you got deep pockets they do make new ones.

 

[hyghlndr]

Given it can be a life or death decision, it is too far gone without major effort.

 

[76YETI]

Man, that sucks....This is just west of Wichita, Ks..... Seems like a decent price.

https://wichita.craigslist.org/pts/d/hutchinson-early-bronco-frame/7111064226.html

 

[Broncobowsher]

But does that frame come with a title?

That is where things can start getting ugly when a frame swap needs to happen. As the values climb so does the scrutiny over VINs on the frame matching the title. The days of a glovebox door and a title to get a Bronco registered are pretty much over.

 

[jerrybromley]

For what it's worth, I have used a pneumatic needle gun to remove the outer layer of rust . The needle gun I have hits hard enough to break through the frame any place it is weak. After this process you WILL see the bad spots and be able to better able to see how much the rust left you to work with. My guess is the frame in those pics is pretty bad...Good Luck

 

[RVB]

Man, that sucks....This is just west of Wichita, Ks..... Seems like a decent price.

https://wichita.craigslist.org/pts/d/hutchinson-early-bronco-frame/7111064226.html

That is a decent price for a good frame. Around here it is more like $1200 for something maybe not that good.

 

[Steve83]

Around here it is more like $1200 for something maybe not that good.

Wow - I'd happily sell this frame for that! ;D

(phone app link)


It's the frame I measured to create this diagram:

(phone app link)

 

[CraigS]

Wouldn't be too hard to move the vin from the old frame to the new frame. Not that I would do something like that, of course.

 

[saili.calvin]

I don't know if I should create a new post or not but if I decide to buy a new frame (like new new, not a used frame with a Vin) how does that work with the existing VIN and being able to register the vehicle?

 

[Broncobowsher]

Rules on VIN swapping vary a little by state. The best is to have a title that matches the frame. If not, usually get the DMV involved. Get involved early. Worst thing possible is to finish the project then try to get a title for it.

 

[elan]

Delete your posts except for the original. Make NO further references to Vin numbers on frames. Do yourself that favor. Send me a PM if need more explanation of why you don't want to screw yourself on a public website.

 

[Steve83]

...if I decide to buy a new frame...how does that work with the existing VIN and being able to register the vehicle?

Contact your local OMV or state police for specific details.

 

[bknbronco]

minnesota your good to go. They dont check any numbers ever. if you got a title you can get plate and tabs. they just want there money. But im happy knowing my title matches my glove box door, frame, motor, and vin tag