• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Roll bar interference

Skinnyr1

Jr. Member
Joined
May 25, 2019
Messages
115
Through the dash is the cleanest, I agree, but nobody has an off the shelf "kit" like that.

I didn't even realize that my vent windows now only open an inch. I read that and went to confirm, bummer. The drivers side actually hits the dash cover first but it still would hit the roll cage plate if it could move anymore.

None the less, I'm pleased with what I was able to put together with the Tom's kit.
 

68ford

Bronco Guru
Joined
Dec 26, 2004
Messages
2,710
I agree with 68Ford, behind the dash is the way to go. I like his idea of moving the dash out when you go behind it to give you more room. My next one will be that way but this is what we came up with on this one. The ebrake is easy to move over, and I will figure out the glove box when I get one, lol, but for storage I will have a center console and we made a box that goes under the passenger seat.

Looks nice!!!! Another thing is if you space the dash out some, obviously you need to cut less of the dash, you can reach the dash if wearing a shoulder harness or 3 point seat belt. I always liked the idea of having the dash just bolt to the cage. Spaced out enough to not cut it. Filled the gap between windshield frame and defroster duct with your crossbar.
 

HigginsHorse

Sr. Member
Joined
Sep 10, 2003
Messages
530
Plates would prevent speakers in the kick panels without major modification and loss of integrity, but I'm sure with enough time someone could figure out a way to make it work. Dash bar isn't required, but I liked it so I included it.
 

JSmall

Bronco Guru
Joined
Feb 18, 2004
Messages
3,224
I’ll 3rd or 4th through the dash :cool: I’m working on a dash for it so the bars will go through the top instead of the face. I started the dash project awhile ago and then it stalled out while I swapped in the 4R70W and Atlas. I’m will be putting some time into the dash soon.
 

Attachments

  • C3268F44-B2F6-4EA6-9188-AFA377BC6957.jpg
    C3268F44-B2F6-4EA6-9188-AFA377BC6957.jpg
    174.7 KB · Views: 94
  • DE71ED71-D131-4065-838B-22FF2CA8ED62.jpg
    DE71ED71-D131-4065-838B-22FF2CA8ED62.jpg
    95.4 KB · Views: 86
  • 82756102-AFE5-4E80-B6A6-C6E99031C230.jpeg
    82756102-AFE5-4E80-B6A6-C6E99031C230.jpeg
    40.7 KB · Views: 80

thiswildbronco

Jr. Member
Joined
Jun 3, 2016
Messages
128
That is super clean!! Looks great!

I’ll 3rd or 4th through the dash :cool: I’m working on a dash for it so the bars will go through the top instead of the face. I started the dash project awhile ago and then it stalled out while I swapped in the 4R70W and Atlas. I’m will be putting some time into the dash soon.
 
Top