I have been messing with broncos since 2005 I have had at least 9 different broncos, and I currently am lucky to have two solid rigs.
But with not much going on at work I have been brain storming about broncos and about what I really want. I have always wanted a 1977 loaded with all the factory options like power steering, disc brakes, an auto trans, and uncut. I would also like original paint or a factory color, a small lift with slots and 31 or 32 tires. The more stock the better. That is my unicorn/Elanor!
I have had a few 77s but they never checked all the boxes or were rust buckets. I had a 75 that had everything thing I wanted but... it was filled with too much rust and the idea of getting a new body was just too much so I recently sold it. With current pricing finding my unicorn for a price that is not insane is a pipe dream. So I have been thinking about taking one of my trucks and building my unicorn.
My 67 is rust free body, frame is solid as can bee a like new WH 3.5" suspension lift with billstein shocks, 1" body lift, Dana 44 with disc front axle, NP435 trans, big bearing rear axle with drums, a bunch of other up grades, and hardware. Power steering added from a 77 bronco. Power brakes. Engine is the original 289 that's getting tired and has been rebuilt too many times. The truck over all is very solid but the body is not real straight, paint is a 15 ft job, as when I built it in 2005 it was meant to be a driver/ trail truck and I did use it for that so there is some minor rock rash in spots. The floor pans have been replace but all the other metal is original. Not much left of the stock interior, seats are aftermarket, dash has been cut, bumpers are after market, like new Rampage top, no hard top. 35" like new BFG Mud terrains.
My 70 is rust free body and frame, all original steel body panels, mostly original paint, Stock suspension, rear fenders are cut, brand new 33" BFG AT. tires on brand new slots maybe 500 miles on the set. Strong running 302 with brand new exhaust, stock 3 speed with floor shifter. Stock dana 30 with drums and 4.10 gears up front, stock ford 9 in back with drums and 4.10 gears. it was manual steering but I just upgraded to stock bronco power steering. Stock seats front and rear. Rear was just recovered. A lot of trim and small pieces were either repaired or replaced on the truck trying to stay as stock as possible. A few other little up grades but over all a very solid truck with a stock vibe and a stock ride.
So I have a bunch of options, 1. Sell one of the trucks take the money and pray I find something close to my unicorn.
2. Pick one of the trucks and build my unicorn. Since I have the other truck if it took a long time I would still have the other to drive.
3.Stop thinking and enjoy what I have.
So what would you do?
But with not much going on at work I have been brain storming about broncos and about what I really want. I have always wanted a 1977 loaded with all the factory options like power steering, disc brakes, an auto trans, and uncut. I would also like original paint or a factory color, a small lift with slots and 31 or 32 tires. The more stock the better. That is my unicorn/Elanor!
I have had a few 77s but they never checked all the boxes or were rust buckets. I had a 75 that had everything thing I wanted but... it was filled with too much rust and the idea of getting a new body was just too much so I recently sold it. With current pricing finding my unicorn for a price that is not insane is a pipe dream. So I have been thinking about taking one of my trucks and building my unicorn.
My 67 is rust free body, frame is solid as can bee a like new WH 3.5" suspension lift with billstein shocks, 1" body lift, Dana 44 with disc front axle, NP435 trans, big bearing rear axle with drums, a bunch of other up grades, and hardware. Power steering added from a 77 bronco. Power brakes. Engine is the original 289 that's getting tired and has been rebuilt too many times. The truck over all is very solid but the body is not real straight, paint is a 15 ft job, as when I built it in 2005 it was meant to be a driver/ trail truck and I did use it for that so there is some minor rock rash in spots. The floor pans have been replace but all the other metal is original. Not much left of the stock interior, seats are aftermarket, dash has been cut, bumpers are after market, like new Rampage top, no hard top. 35" like new BFG Mud terrains.
My 70 is rust free body and frame, all original steel body panels, mostly original paint, Stock suspension, rear fenders are cut, brand new 33" BFG AT. tires on brand new slots maybe 500 miles on the set. Strong running 302 with brand new exhaust, stock 3 speed with floor shifter. Stock dana 30 with drums and 4.10 gears up front, stock ford 9 in back with drums and 4.10 gears. it was manual steering but I just upgraded to stock bronco power steering. Stock seats front and rear. Rear was just recovered. A lot of trim and small pieces were either repaired or replaced on the truck trying to stay as stock as possible. A few other little up grades but over all a very solid truck with a stock vibe and a stock ride.
So I have a bunch of options, 1. Sell one of the trucks take the money and pray I find something close to my unicorn.
2. Pick one of the trucks and build my unicorn. Since I have the other truck if it took a long time I would still have the other to drive.
3.Stop thinking and enjoy what I have.
So what would you do?











