• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Brake line mounting clips

johnbeck

Sr. Member
Joined
Aug 11, 2015
Messages
534
I bought Brake/fuel line Frame Mount Clips with screws. The screws apprear to be 10/32 N.F. What size bit do I use for that screw? Are there self tapping screws that would be strong to screw into the frame? Thanks
 

Slednut10

Contributor
Guru? That's funny!
Joined
Sep 26, 2013
Messages
2,398
Assuming you are tapping the threads, a #21 drill bit. Closest fractional size is 5/32
 

rguest3

Bronco Guru
Joined
Dec 13, 2012
Messages
3,780
Purchase a Tap for that thread size that comes with a correct size Drill Bit. Lowes, Home Depot, et.

Drill first, Tap threads for the bolt, install Bolt.
 
OP
OP
J

johnbeck

Sr. Member
Joined
Aug 11, 2015
Messages
534
Thanks for your help. Unfortunetly some of our suppliers universely send out product with no information. A simple listing of screw size, maybe going so far as to list the corrisponding bit size would, in this case, have save each consumer(Unless your one in a hundred people that can look at a screw and say to yourself, Oh that's a 10-32 N.F.), the time to get out a tap and die set and by process of elimination, determine it's size, provided it's not metric. The lack ofMINIMAL instuction burns too significant amount of time. What would have been a 45 minute project too often is a hour and 20. Unfortunately the bar isn't likely to be raised.
 

rguest3

Bronco Guru
Joined
Dec 13, 2012
Messages
3,780
Correct, it can be a guessing game when the hardware size is not noted somewhere.
 
OP
OP
J

johnbeck

Sr. Member
Joined
Aug 11, 2015
Messages
534
Unfortunately I already bought the Dewalt bit and a tap for a 10-32 screw. Worked well but when I am doing more than 2 or 3 again I'll spend the money on that combined bit/tap just to save time. Thanks for the advice! John B in SB
 
Top