• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Upgraded to Fox 2.5’s

garberz

Bronco Influencer
Joined
Jun 24, 2007
Messages
6,864
Loc.
Conejo Valley, Ca.
I recently upgraded to Fox 2.5” smoothie shocks. These are 12” travel. Replaced my Bilstein 7100’s after going to 37” tires with new 17” wheels. The additional 100lbs. per axle was just a little too much for the Bilsteins to handle. The Fox’s have adjustable compression dampening that work very well. The initial valving was set up by Accutune Off Road. They valve the shocks according to suspension type and vehicle weight, and a few other bits of info. So far it’s been a huge difference with on road manners. Looking forward to seeing the difference out in the desert.

Mark
 

Attachments

  • 5EEAB246-CAC7-408D-AD2D-5502D47748FD.jpg
    5EEAB246-CAC7-408D-AD2D-5502D47748FD.jpg
    92.4 KB · Views: 288
  • 6293F3EC-559A-44AA-9D2E-2F6E4F2151EA.jpg
    6293F3EC-559A-44AA-9D2E-2F6E4F2151EA.jpg
    63.5 KB · Views: 277
  • 7B1EA7AC-C43C-478A-806C-0E28B0845854.jpg
    7B1EA7AC-C43C-478A-806C-0E28B0845854.jpg
    121.8 KB · Views: 274

jckkys

Contributor
Bronco Guru
Joined
Mar 15, 2012
Messages
5,221
I have the 2.0s on mine and love them. They control the harshness and ride better than any new pickup I've been in. For some reason, I read plenty of threads about Bilsteins but few are willing to move up to Fox shocks.
 

toddz69

Sponsor/Vendor
Bronco Guru
Joined
Nov 28, 2001
Messages
11,222
I recently upgraded to Fox 2.5” smoothie shocks. These are 12” travel. Replaced my Bilstein 7100’s after going to 37” tires with new 17” wheels. The additional 100lbs. per axle was just a little too much for the Bilsteins to handle. The Fox’s have adjustable compression dampening that work very well. The initial valving was set up by Accutune Off Road. They valve the shocks according to suspension type and vehicle weight, and a few other bits of info. So far it’s been a huge difference with on road manners. Looking forward to seeing the difference out in the desert.

Mark

Looking good, Mark! Really looking forward to hearing your impressions out in the dirt. I really like my Fox 2.0s.

Todd Z.
 

BanditBronco

Sr. Member
Joined
Jul 2, 2008
Messages
690
Nice! adjustable shock mounts as well, not sure if I have seen someone run those yet or not. Looks Like it worked pretty well for you. Did you actually put your rig on some scales or did you give them an estimate? I know they like to know corner weight which isn't the easiest dart throw in my opinion. Its desert season, go get those things dirty and let us know what they 're all about!
 

reynard101

Bronco Guru
Joined
Aug 19, 2006
Messages
1,098
How do you like the rubber inserts in the middle of the coil spring? These act as secondary rate and bump stops?
 
OP
OP
garberz

garberz

Bronco Influencer
Joined
Jun 24, 2007
Messages
6,864
Loc.
Conejo Valley, Ca.
Nice! adjustable shock mounts as well, not sure if I have seen someone run those yet or not. Looks Like it worked pretty well for you. Did you actually put your rig on some scales or did you give them an estimate? I know they like to know corner weight which isn't the easiest dart throw in my opinion. Its desert season, go get those things dirty and let us know what they 're all about!

I estimated my unsprung weight, but I did know the weight of the tire/wheel combo. I feel I was very close on the corner weights. Knowing the coil spring rate, and how far the springs compress to at ride height.

Mark
 
OP
OP
garberz

garberz

Bronco Influencer
Joined
Jun 24, 2007
Messages
6,864
Loc.
Conejo Valley, Ca.
How do you like the rubber inserts in the middle of the coil spring? These act as secondary rate and bump stops?

They work great as bump stops at slow speed. The add to the spring rate with no effect on rebound, which was a big plus. I still need to do some better bump stops still.

Mark
 

nvrstuk

Contributor
Just a Bronco driver for over 50 yrs!
Joined
Jul 31, 2001
Messages
10,622
Loc.
PNW
They look great Mark. Like Todd said, give us an update when you get some good testing on them. Would like to hear your comparison to the Bilstein 7100's. Should be a great step up.
 

lars

Contributor
Been here awhile
Joined
Jun 29, 2001
Messages
3,334
Loc.
NorCal flatlands
Very nice, Mark. Likewise looking forward to a report.

I switched from Bilstein 7100s valved 360/80 to Fox 2.0 reservoir shocks years ago, on the front axle. Assembled/valved by raceshock.com in PHX based on the usual intended use inputs from me. Would've loved a pair of the 2.5's if they'd been available at the time but the 2.0's were a big improvement over the Bilsteins.
 

Yeller

Contributor
Bronco Guru
Joined
Mar 27, 2012
Messages
7,692
Loc.
Rogers County Oklahoma
The shaft on the Bilsteins as good as they are is too small to handle enough compression dampening for serious high speed work, unless its a really light vehicle, and a bronco is not that LOL.

Very nice upgrade, I'm interested in the performance as well. I keep contemplating reworking my bronco for external bypass shocks, but I just don't do enough desert running to justify the spend.
 
OP
OP
garberz

garberz

Bronco Influencer
Joined
Jun 24, 2007
Messages
6,864
Loc.
Conejo Valley, Ca.
The shaft on the Bilsteins as good as they are is too small to handle enough compression dampening for serious high speed work, unless its a really light vehicle, and a bronco is not that LOL.

Very nice upgrade, I'm interested in the performance as well. I keep contemplating reworking my bronco for external bypass shocks, but I just don't do enough desert running to justify the spend.

This has been my experience with the Bilsteins as well. And recently I’ve added a lot of unsprung weight. I was definitely looking for a lot more compression dampening, and chose the Fox’s over the King’s because of the added adjustability. I’m always trying to make my Bronco more versatile. My last Mojave Trail trip really showed me how I need a huge more amount compression up front.

Mark
 

Yeller

Contributor
Bronco Guru
Joined
Mar 27, 2012
Messages
7,692
Loc.
Rogers County Oklahoma
This has been my experience with the Bilsteins as well. And recently I’ve added a lot of unsprung weight. I was definitely looking for a lot more compression dampening, and chose the Fox’s over the King’s because of the added adjustability. I’m always trying to make my Bronco more versatile. My last Mojave Trail trip really showed me how I need a huge more amount compression up front.

Mark

Those trips are well on my radar too so I know I need to do something. I've been on trips were my shocks were so hot you couldn't touch them, fortunately on the bronco never so hot to burn the paint off, but have been there before.
 
Top