• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Any other make or year vehicle matches the Bronco bench seat hinge covers

UNCbronco

Sr. Member
Joined
Jul 22, 2018
Messages
376
Has anyone ever used a different make or year vehicle hinge covers to fit the Bronco bench seat hinges ? I am trying to find if something else will fit these hinges or a vendor that makes them, Before you say check with Nick at Northeast Classic Ford Parts, I have and he didn`t know of any, Let`s see what you have used ? Thanks
 

Attachments

  • IMG_0840.jpg
    IMG_0840.jpg
    76.5 KB · Views: 121
  • IMG_0841.jpg
    IMG_0841.jpg
    81.4 KB · Views: 142
  • IMG_0842.jpg
    IMG_0842.jpg
    77.2 KB · Views: 116
  • IMG_0832.jpg
    IMG_0832.jpg
    66.8 KB · Views: 109

okie4570

Contributor
Bronco Guru
Joined
Jul 16, 2012
Messages
9,536
Loc.
NW OK
Check into 63-65 Falcon hinge covers. I researched this some when I was looking for the same thing. I found a set of bronco covers and kind of quit looking into other model covers.
 
OP
OP
UNCbronco

UNCbronco

Sr. Member
Joined
Jul 22, 2018
Messages
376
Check into 63-65 Falcon hinge covers. I researched this some when I was looking for the same thing. I found a set of bronco covers and kind of quit looking into other model covers.

I have sent some messages with pictures to four early Ford vehicles vendors that sells different bench seat hinge covers to see if any of there covers will match what I have. We will see what they say, Thanks
 

sprdv1

Contributor
REBEL
Joined
Mar 8, 2007
Messages
81,996
Check into 63-65 Falcon hinge covers. I researched this some when I was looking for the same thing. I found a set of bronco covers and kind of quit looking into other model covers.

good info brother...
 

chris-nc

Bronco Apprentice
Joined
Sep 1, 2020
Messages
52
Ok, so I know this topic comes up every now and then, and I had even been searching for the better part of a year and reading a lot of posts trying to figure out a solution. I can confirm that these hinge covers worked out well for my early build '66 original bench seat.

http://www.ecklers.com/1963-1965-falcon-comet-convertible-bench-seat-hinge-covers-black-90-35589-1.html

I took the seat back out of the truck, did a test fit and had to drill and tap a couple of holes. The screws they included were a little long, so I just cut them down. I think they turned out great.

As always though, your mileage may vary! :)
 

Attachments

  • IMG_1229.jpeg
    IMG_1229.jpeg
    141.5 KB · Views: 102
  • IMG_1230.jpeg
    IMG_1230.jpeg
    156.2 KB · Views: 136

broncojack

Contributor
Sr. Member
Joined
Sep 7, 2001
Messages
844
Ok, so I know this topic comes up every now and then, and I had even been searching for the better part of a year and reading a lot of posts trying to figure out a solution. I can confirm that these hinge covers worked out well for my early build '66 original bench seat.

http://www.ecklers.com/1963-1965-falcon-comet-convertible-bench-seat-hinge-covers-black-90-35589-1.html

I took the seat back out of the truck, did a test fit and had to drill and tap a couple of holes. The screws they included were a little long, so I just cut them down. I think they turned out great.

As always though, your mileage may vary! :)

Thanks Chris!
 
Top