Need more help

[Bdhand]

Got my DUI distributor today. I know there is supposed to be a bracket that holds it in place but I can’t find it anywhere. Anybody got a pic of what it looks like and where I can find one. Thanks

 

[Bitch'nBronco]

Most small block ford distributor hold downs will work, I've got one like this on mine

https://www.summitracing.com/parts/msd-8010/make/ford

 

[SteveL]

While you're at it DUI recommends running an aftermarket oil pump drive. The stock ones weren't consistent length and may not allow the dizzy to seat all the way down. I ran into this on mine. I went with an arb from Summit.

 

[Bdhand]

While you're at it DUI recommends running an aftermarket oil pump drive. The stock ones weren't consistent length and may not allow the dizzy to seat all the way down. I ran into this on mine. I went with an arb from Summit.

Steve was yours a 170 straight six??

 

[SteveL]

No, mine are 351w.

 

[ransil]

Most small block ford distributor hold downs will work, I've got one like this on mine

https://www.summitracing.com/parts/msd-8010/make/ford

$53 for that!!!

 

[ransil]

if a 302 one will fit I just sold @fordfan on here a bunch of hardware and there were at least 2 hold downs included.

 

[stout22]

I believe it is the same as a small block V8. It is a cast piece.

 

[gnpenning]

$53 for that!!!

My thoughts exactly. Not even gold plated......

 

[NGABronco]

If this will work, PM me your name and addy and I'll mail it to ya'!;D;D;D

The one from Summit looks to be totally flat???;D;D

 

[sprdv1]

If thie will work, PM me your name and addy and I'll mail it to ya'!;D;D;D

The one from Summit looks to be totally flat???;D;D

bronco family.....