• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

77 Help

chrlsful

Bronco Guru
Joined
Oct 21, 2009
Messages
1,448
this is "77's help"
(but: grounds
any ol rig that's 1st in my thoughts)
 

SteveL

Huge chevy guy
Joined
Jun 24, 2001
Messages
11,969
Loc.
Hawthorne ca
For the headlights check the hi beam switch on the floor. If you order new u-bolts for the rear make sure they know it's for a 77. The axle tubes are bigger than the earlier housings.
 
OP
OP
Bdhand

Bdhand

Contributor
Sr. Member
Joined
Aug 15, 2015
Messages
712
Would it be a ground if it does it after the truck has run a while? Just wondering why it doesn't do it from the start when you first turn them on. I would think if it were a ground it would do it all the time but then again I don't know what I am talking about LOL! Makes more sense to me the overloading after the lights warm up!
 

chrlsful

Bronco Guru
Joined
Oct 21, 2009
Messages
1,448
yup, # 1 & 2, any order U want.
A ground is often intermitant. Quite often w/road bumps/bounce.
 

Slowleak

Bronco Guru
Joined
Sep 12, 2013
Messages
4,013
Loc.
Georgia
If it is the headlight breaker, you will hear it click off and on while you are in the Bronco with the engine off and the lights on.
 

Madgyver

Bronco Madman
Joined
Jul 30, 2001
Messages
15,030
breaker? i believe its a relay. headlight relays are usually mounted close to battery. look there. radiator support or maybe on passenger fenderwell.
 

jckkys

Contributor
Bronco Guru
Joined
Mar 15, 2012
Messages
5,221
Nothing in this thread is uniquely applicable to '77s. All EBs have these same issues after 40-50 yrs.
 
OP
OP
Bdhand

Bdhand

Contributor
Sr. Member
Joined
Aug 15, 2015
Messages
712
Another question??? If I leave it uncut and keep the 15” rims on it but install a 2 1/2” lift what is the biggest tire size I can run? I would like to get 31's on there but not sure if you can with the factory rims. I think I read somewhere about 7” wide rims VS wider rims. I want to keep the factory rims for right now. But I am not sure how wide they are!
 

Attachments

  • FBB70E92-B623-4067-8137-402D7AAF5F4A.jpg
    FBB70E92-B623-4067-8137-402D7AAF5F4A.jpg
    141.7 KB · Views: 61

chrlsful

Bronco Guru
Joined
Oct 21, 2009
Messages
1,448
every single vehicle (even in same Y/M/M) can B different as age/sag of frnt rear springs, on-board weight differences, etc.
For real help I'd say post a new thread whenever changing topics mid-thread. U will get better attention w/THAT as named, etc.
Most rigs will fit a 31 inch tire uncut (no lift). A 10.50 might B pushin it. Better more narrow, but should B "OK". W/the 2.5 - I'm sure ur no rub. Carry 1/4, 1/2 cord, fire wood? No.
 

DirtDonk

Contributor
Bronco Guru
Joined
Nov 3, 2003
Messages
51,650
I'd have no issue mounting a 10.50 wide tire on a 6" wide factory rim, and very little issue with doing it on a 5.5" wide factory rim.
I believe that they got wider as the years went by, so yours would have the 6" if that's the case. So 10.50 no problem as long as you can use a tire shop that does not care.
With the legal ramifications these days, most big chain shops won't mount the tires to any wheel that's not in the tire manufacturer's recommended width range. Which is often 7" minimum anymore. So the big chain stores might not, but the smaller mom-n-pop shops should still do it.

I've never had a problem running that "four inch wider" tire size on any wheel. I've run 10.50's on 6's and still have 11.50's on 7's. Never any trouble with wear or safety.

Paul
 

chrlsful

Bronco Guru
Joined
Oct 21, 2009
Messages
1,448
"...never had a problem running that "four inch wider" tire size on any wheel..."

WoW~
I think they start to 'ballon out' (look wacky) don't they Paul?
No ability to 'air dwn' for off rd grip, etc?
thnx
 

DirtDonk

Contributor
Bronco Guru
Joined
Nov 3, 2003
Messages
51,650
They do look that way to some, but I have never felt that way. They don't actually balloon out, because you are literally pulling the sidewall in tighter so it's impossible for it to get physically wider. But the visual difference between the sidewall bulge and the rim bead is greater, so that appearance of bulging out is there to some. Personally I have always liked that look.

It also enhances your low pressure running by keeping a higher pressure on the tire bead and keeping the tire from de-beading at low pressures. Not as good as a bead lock wheel of course, but better than a wider wheel combination.

It also protects the rim edge better by having more tire outside of the wheel. Those last two reasons are why in the old days before bead locks were common you used to see the desert racers running 12.50 inch wide tires on 7 inch wide wheels.

For the street we simply do what we always do for every new tire and wheel combination, and adjust pressures accordingly for tire wear.
 

chrlsful

Bronco Guru
Joined
Oct 21, 2009
Messages
1,448
✓







(additional characters added to simply meet msg post requirements)
 

MitchE

New Member
Joined
Oct 25, 2020
Messages
43
I had the same light issue and replaced the switch in the dash. All is well.
Get a new switch with spacer connected. I gave up on trying to install it. Ended up using crazy glue to hold it on. Went thru a 12 pack of coors light
 

DirtDonk

Contributor
Bronco Guru
Joined
Nov 3, 2003
Messages
51,650
Crazy glue is a great idea! I siliconed the last couple in place and it worked great. Problem is you’ve got to wait so long for it to firm up to work with.
 
Top