• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Ford thunderbird console swap/build

Germd

Full Member
Joined
Jun 16, 2014
Messages
343
Your results look spectacular! Congrats on seeing it through from concept to install!
what did you end up doing to refinish the pitted chrome pot metal? 60โ€™s era cars had a lot of gorgeous chrome interior trim that could be repurposed, but for the cost of rechroming.
Totally agree that the Tuffy consoles - while very utilitarian, leave much to be desired in the style department.
tim
 
OP
OP
amfw

amfw

Sr. Member
Joined
Nov 10, 2008
Messages
522
Your results look spectacular! Congrats on seeing it through from concept to install!
what did you end up doing to refinish the pitted chrome pot metal? 60โ€™s era cars had a lot of gorgeous chrome interior trim that could be repurposed, but for the cost of rechroming.
Totally agree that the Tuffy consoles - while very utilitarian, leave much to be desired in the style department.
tim
Thank you, it was a truly engrossing project. I couldn't look away while I was doing it. For the chrome, I originally just tried a chrome paint. That was pretty terrible, so I just gave it a brushed finish. Its not particularly pretty, but its clean enough that it doesn't bother me. I would be interested in rechroming, but I haven't pursued it much. I am aware that its probably more than I want to spend. I have basically added thunderbird chrome trim to my list of OEM parts that I am always on the lookout for. I did a small project with the factory radio faceplate that also would have benefited from some re-chroming, but I just left that one alone. A member (Duffy Mahoney) here recently had his radio faceplate re-chromed and it looks awesome, though I'm not sure how much it cost.
 

Germd

Full Member
Joined
Jun 16, 2014
Messages
343
Rechroming is not a very environmentally friendly process, hence Iโ€™ll bet itโ€™s become very expensive if you can even find someone to do it. I like the brushed or matte finish. I wonder what material could be used to fill the tiny pits in the metal?
By now Iโ€™m sure you know you โ€œstoleโ€ that console! I had a 1966 GTO & a 1970 Torino Cobra. Finding OEM chrome replacement interior parts was very expensive and usually included an organ donation! I spent many afternoon cruising scrap yards and many nights fabricating parts for those cars. Never thought 3D printers would become relatively commonplace.
 
OP
OP
amfw

amfw

Sr. Member
Joined
Nov 10, 2008
Messages
522
Rechroming is not a very environmentally friendly process, hence Iโ€™ll bet itโ€™s become very expensive if you can even find someone to do it. I like the brushed or matte finish. I wonder what material could be used to fill the tiny pits in the metal?
By now Iโ€™m sure you know you โ€œstoleโ€ that console! I had a 1966 GTO & a 1970 Torino Cobra. Finding OEM chrome replacement interior parts was very expensive and usually included an organ donation! I spent many afternoon cruising scrap yards and many nights fabricating parts for those cars. Never thought 3D printers would become relatively commonplace.
As far as the pitting goes, a lot of it cleaned up with the brushing. Again, nowhere near a show finish but nice enough for my rig. And as far as "stealing" the console goes... I definitely feel lucky to have found it and for the price/condition. I spent almost DOUBLE what I paid for everything on two replacement chrome pieces. But that's the weird thing about markets and stuff today, even at 50 bucks, this guy couldnt sell it. It was ready to go in the trash as far as he was concerned. Meanwhile there are people asking 200 plus 100 shipping for the skeleton on eBay. I wish more people prioritized getting it to a good home rather than trying to extract every bit of imagined value from a part that has been sitting around forever.
 
OP
OP
amfw

amfw

Sr. Member
Joined
Nov 10, 2008
Messages
522
Rechroming is not a very environmentally friendly process, hence Iโ€™ll bet itโ€™s become very expensive if you can even find someone to do it. I like the brushed or matte finish. I wonder what material could be used to fill the tiny pits in the metal?
By now Iโ€™m sure you know you โ€œstoleโ€ that console! I had a 1966 GTO & a 1970 Torino Cobra. Finding OEM chrome replacement interior parts was very expensive and usually included an organ donation! I spent many afternoon cruising scrap yards and many nights fabricating parts for those cars. Never thought 3D printers would become relatively commonplace.
and man, I love having a 3d printer. It makes ALL SORTS of custom stuff possible :)
 

stupidboy

My wifes porn star.
Joined
Dec 29, 2009
Messages
5,790
Loc.
Morrisdale Pa.
But that's the weird thing about markets and stuff today, even at 50 bucks, this guy couldnt sell it. It was ready to go in the trash as far as he was concerned. Meanwhile there are people asking 200 plus 100 shipping for the skeleton on eBay. I wish more people prioritized getting it to a good home rather than trying to extract every bit of imagined value from a part that has been sitting around forever.
Well said!!!!
 

Howard2x4x4

Contributor
Bronco Guru
Joined
Apr 19, 2014
Messages
2,474
Rechroming is not a very environmentally friendly process, hence Iโ€™ll bet itโ€™s become very expensive if you can even find someone to do it. I like the brushed or matte finish. I wonder what material could be used to fill the tiny pits in the metal?
By now Iโ€™m sure you know you โ€œstoleโ€ that console! I had a 1966 GTO & a 1970 Torino Cobra. Finding OEM chrome replacement interior parts was very expensive and usually included an organ donation! I spent many afternoon cruising scrap yards and many nights fabricating parts for those cars. Never thought 3D printers would become relatively commonplace.
Germd, that truly is a high price! Did you get to choose which organ or was it dealers choice or maybe drawn from slips in a bowl? Very funny and clever! Thanks for the chuckle! Howard in beautiful west Michigan
 
OP
OP
amfw

amfw

Sr. Member
Joined
Nov 10, 2008
Messages
522
Well, I am happy to report that with "Bronco Season" winding down here in the northeast, my console has been a very welcome addition to the rig! I never did anything with the super cool ashtray thats on the front of it though. Just a couple weeks ago I realized it would make a perfect spot to house my sunglasses! So that will be my next minor mod on this. I am going to pull the ashtray off of the front of the console, cut out the metal that supports the old cigarette lighter and ashtray (sadly, my days of smoking cigs and cruising are behind me) and clearance it to accept a little tray that I will print to be able to slip my shades into. The fit is TIGHT, as in I doubt this will work if I change style of sunglasses, but ๐Ÿคทโ€โ™‚๏ธ.

IMG_20220921_083028 (1).jpg IMG_20220921_083032.jpg
 
OP
OP
amfw

amfw

Sr. Member
Joined
Nov 10, 2008
Messages
522
This was a piece that was kind of pitted on the original console I picked up, so I had purchased a replacement in nicer condition off of ebay. Works out well for this because I was able to hack up the poor condition one first for a rough draft. A few careful measurements later and some printing and I've got myself a pretty good start! Gonna pull the actual final piece out soon and give it a go.
IMG_20220922_134832.jpg
IMG_20220922_133948.jpg
 
OP
OP
amfw

amfw

Sr. Member
Joined
Nov 10, 2008
Messages
522
Went ahead and did the actual piece that will be in the Bronco and it's a nice little upgrade for sure. I have some lining coming tomorrow for it.
IMG_20220924_120913.jpg
 

Attachments

  • IMG_20220924_120917.jpg
    IMG_20220924_120917.jpg
    175.7 KB · Views: 138
  • IMG_20220924_120812.jpg
    IMG_20220924_120812.jpg
    186.1 KB · Views: 116
Top