• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Is the tilt column necessary?

GloNDark

Sr. Member
Joined
Aug 22, 2007
Messages
399
I have run both Tilt and Non-Tilt columns on multiple Broncos. I prefer the Tilt so I can put the wheel exactly where I want it. Plus with some aftermarket seats it makes it a lot easier getting in and out of the driver seat. I think it really comes down to personal preference really.

My last build came with a rebuilt stock column and I removed it in favor or a Wildhorse4x4 tilt column for comfort.
 
OP
OP
Dne007

Dne007

Sr. Member
Joined
Jul 18, 2021
Messages
539
Well, a lot of great responses to my question and I do appreciate them! ;) I have tilt column in my '67 Mustang, someone wrote that some columns tilt further down, than up which is the case in the ididit column in it. My '68 Willys/Kaiser jeep has a straight column, no brand name and works incredibly well, but is just a column, no shift. I would have no problem as I feel I'm a good height at 5'9"@150lbs, however my husband has a bit of a waist, so that's why I'm probably going with the tilt.

I'm having to guess that my column was stock? Had a 3 speed column, but was converted to a floor shift some place in time. I'm wanting a shift on the column for my C4 trans.

So, looks like the safest way to go is a tilt;)
dne'
 

Attachments

  • Bronco steering column.jpg
    Bronco steering column.jpg
    231.5 KB · Views: 70

sprdv1

Contributor
REBEL
Joined
Mar 8, 2007
Messages
81,996
Hi, I've been looking at tilt columns and just wanting to ask is it absolutely necessary? Would a standard column work just fine? I have power steering and I remember it being very easy to steer(for the 10' that I moved it). I think I'd be running a 14" steering wheel, or possibly 13.5"? don't need leverage like from a 15".
thanks,
dne'

A convenience for sure.. they are nice
 

sprdv1

Contributor
REBEL
Joined
Mar 8, 2007
Messages
81,996
I have run both Tilt and Non-Tilt columns on multiple Broncos. I prefer the Tilt so I can put the wheel exactly where I want it. Plus with some aftermarket seats it makes it a lot easier getting in and out of the driver seat. I think it really comes down to personal preference really.

My last build came with a rebuilt stock column and I removed it in favor or a Wildhorse4x4 tilt column for comfort.

well stated for sure
 

Pa PITT

Contributor
Bronco Guru
Joined
Jul 15, 2005
Messages
11,300
Loc.
Stephenville TEXAS
RUSTY ... WITH THIS column .. I believe I ground off the stock 1979 mounting bracket .. Just drill & grind the spot welds.
But then when you put the Stock Mounting Bracket From your old Bronco Column back onto the 79 Column ... YOU can choose your location So you can push your new column forward 2 or 3 inches.
& The shaft with the U-Joint can be sawed off & Your problem is fixed .
& In you case I'd think you'd like that steering wheel could be dropped down a couple of clicks.
...............
........I think using one of these tilt Columns IS If you've not had one you don't realize how there is another location that you'll like better .
 
Top