• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Rear Frame Rail Threaded Holes Q?

Faster Eddie

Sr. Member
Joined
Jun 24, 2013
Messages
424
Loc.
Seattle
Can anyone tell me what bolt fits into the threaded holes on the bottom of the frame rail by the gas tank?

PO has some exhaust hangers bolted into a couple of them and the bolts are stripped/spinning as I try to remove them.

What was it originally (size and thread) and can I just re-tap it to reclaim use?

Thanks!
 

DirtDonk

Contributor
Bronco Guru
Joined
Nov 3, 2003
Messages
51,650
Got a picture? Are they along in the very rear of the frame near the rear spring hanger? In other words, next to the gas tank?
Are there four or six of them? If so, they might be for the factory, optional gas tank, skid plate.
 
OP
OP
Faster Eddie

Faster Eddie

Sr. Member
Joined
Jun 24, 2013
Messages
424
Loc.
Seattle
Yes beside the gas tank. Threaded Hole, long oval hole, threaded hole. On both frame rail ends.

Cant post a pic for some reason
 

DirtDonk

Contributor
Bronco Guru
Joined
Nov 3, 2003
Messages
51,650
No problem. You have to be a contributor for 12 bucks a year to post images directly.
Sounds like skid plate holes.
 

DirtDonk

Contributor
Bronco Guru
Joined
Nov 3, 2003
Messages
51,650
The package came with a transfer case skid plate too.
Do you have one of those?
 

m_m70

Contributor
Bronco Guru
Joined
Jun 14, 2001
Messages
1,770
Loc.
Prescott AZ
dog point.jpg

Dog point
 

Speedrdr

Contributor
Legend in my own mind
Joined
Nov 27, 2017
Messages
2,028
Loc.
Paris, MS
Well, dang! Used them all my life…well the last 50+ years…and never knew they were named that. Thanks!!

Randy
 
OP
OP
Faster Eddie

Faster Eddie

Sr. Member
Joined
Jun 24, 2013
Messages
424
Loc.
Seattle
PO hung an exhaust hanger from that hole with a bolt that may or may not be 3/8-16. It just spun until I put counter pressure behind the head to draw it out. It's 2" long,

Probably have to tap it up bigger now huh?
 

jamesroney

Contributor
Bronco Guru
Joined
Sep 11, 2007
Messages
2,612
Loc.
Fremont, CA
PO hung an exhaust hanger from that hole with a bolt that may or may not be 3/8-16. It just spun until I put counter pressure behind the head to draw it out. It's 2" long,

Probably have to tap it up bigger now huh?
you have choices...

1. tap it bigger.
2. weld it up and re-thread to size.
3. Drill bigger and fish a threaded plate up from the frame horn opening.
4. Drill bigger and install a nutsert.
5. Drill even bigger and weld in a threaded bung.
6. Weld a rod to a flange head bolt and fish the flange bolt into the hole. Add a nut on the bottom.
7. Make a hole in the top of the frame and install a long shank shoulder bolt from the top.
8. Make a bigger hole in the top of the frame and install a thru-bung. Weld and finish from the top.
9. Cut a section of the frame and replace with a weld in section.
10. Back-half the rear suspension and replace frame with a new sub-frame.
11. Replace the complete frame.
12. Replace the Bronco.
13. Open a Bronco Restoration shop with welding and fabrication capability. Hire a skilled technician to manage the shop. Tell your employee to fix the hole.
 

DirtDonk

Contributor
Bronco Guru
Joined
Nov 3, 2003
Messages
51,650
The scary thing is that he’s not kidding. It’s what he did, except he’s the only employee so he hast to keep telling himself to fix the hole.😁
 

m_m70

Contributor
Bronco Guru
Joined
Jun 14, 2001
Messages
1,770
Loc.
Prescott AZ
I always look forward to read responses from James. Extremely honest, articulate and accurate!
 
Top