• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Oil Pan Dipstick

Howard2x4x4

Contributor
Bronco Guru
Joined
Apr 19, 2014
Messages
2,474
It is not a hard mod to do if you have your pan out. I drilled out the 4 rivets holding the dipstick in the pan and took the inner plate and flipped it over and mounted it to the outside. The inner plate has a thick boss that can be drilled out and tapped for the threaded in dipsticks. I welded nuts inside the pan if it ever needs serviced, it can be removed without dropping the pan. Put a good gasket/sealer on it and bolt it in. I haven't had any issues with it so far. Ken
You sure do good work, Ken!
 

bronkenn

Contributor
Bronco Guy
Joined
Apr 27, 2017
Messages
2,717
Loc.
Southeast Ohio
Good evening Kenn- I know this is an old thread but I have a couple questions - what size tap did you use - I’m having trouble finding the 1/4-20 ? Is it an NPT threads or something else? Also my bronco has an 302 engine out of an econoline van - I think it’s a 1971 but not sure. The number stamped on the oil pan is DITE-6675-BA - I’ve got my pan off and the inside looks like yours- have you had any blow back issues yet? I know it's been a few years - would you still do it the same?
It was my late brother's bronco and I've been working on it - just like interior and oil pan I hope!! Thanks for your reply
I used the 1/4-20 nuts for the 4 bolts in the pan and I believe it was 1/4 NPT for the dipstick. I have had zero issues with that mod and would do it again.
 
Last edited:

fluffybunny

Full Member
Joined
Oct 28, 2015
Messages
219
I just finished mine up and it's a definite improvement over stock. The toughest part was getting 50 years of grime off of the pan. With the new oil in, I can't tell where it's reading on the dipstick so I'll have to drive it more.
 

Attachments

  • 20240211_073023.jpg
    20240211_073023.jpg
    199.5 KB · Views: 124
Top