- Joined
- Apr 19, 2014
- Messages
- 2,474
You sure do good work, Ken!It is not a hard mod to do if you have your pan out. I drilled out the 4 rivets holding the dipstick in the pan and took the inner plate and flipped it over and mounted it to the outside. The inner plate has a thick boss that can be drilled out and tapped for the threaded in dipsticks. I welded nuts inside the pan if it ever needs serviced, it can be removed without dropping the pan. Put a good gasket/sealer on it and bolt it in. I haven't had any issues with it so far. Ken











