• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

fuel injector size help

4x4man514

Contributor
Bronco Guru
Joined
Aug 28, 2003
Messages
1,157
Loc.
Augusta,Georgia
hey guys, ive been plugging around on here and on some of the mustang sites trying to find some info and it seems there are alot of different opinions on what is best. alot of what ive read was old so i thought id try to se what the current opinion is. alot of you have given me advice over the last year so you may remember me.

ive got a 393 that im STILL trying to get running. it has a lightning intake on it and im hoping for around 400 hp give or take. i recently figured out that at least the front two injectors arent opening. i dont think any of them are. ive used a noid light and they seem to be getting signal. using the 9 volt battery test i cant hear them clicking. the plugs were dry when i pulled them and there is no trace of a gas smell in the exhaust. the motor will try to start if i spray some starter fluid in it but nothing w/o it. im fairly certain its the injectors. the ones that are in it are the dark blue 36 pound fat injectors that i think came out of a tbird. i cant find anymore like that anyways.

so im trying to figure out what to go with. maybe upgrade if i need to. it seems they are all expensive. i hear people saying that if they are too big there will be idling problems. but i hear alot of good things about the siemmans deka 4 60 pound injectors . apparently the new technology has fixed the low end problems. alot of people on the mustang sites tend to like them but i know our broncos are alot different animal than a mustang.

so what do yall think? what is the popular opinion here? what works and what doesnt?

thanks a bunch!
kevin
 

Broncobowsher

Contributor
Total hack
Joined
Jun 4, 2002
Messages
37,112
I'll ask the simple question, you have good fuel pressure in the fuel rail? Not in the line, at the filter, at the regulator, actually in the fuel rail.
I have seen many EFI swaps that didn't get the fuel system right and were left without fuel pressure in the rail. Typically simple mistakes. The ones you can't really find because they are so simple.
 
OP
OP
4x4man514

4x4man514

Contributor
Bronco Guru
Joined
Aug 28, 2003
Messages
1,157
Loc.
Augusta,Georgia
well i was concerned about missing something simple so i understand exactly where your coming from but i do have 40 pounds at the shrader valve on the rail.
 

lars

Contributor
Been here awhile
Joined
Jun 29, 2001
Messages
3,334
Loc.
NorCal flatlands
Siemens Deka 60 pound injectors are just as happy on a Bronco as on a Mustang or anything else, including certain Porsches. If EFI Guy sees this he can elaborate more; my 408 idles just fine with them, pulls happily to 5500 rpm etc. They are popular because even though they can flow a lot at the high end, they also meter well at idle.
 
OP
OP
4x4man514

4x4man514

Contributor
Bronco Guru
Joined
Aug 28, 2003
Messages
1,157
Loc.
Augusta,Georgia
Siemens Deka 60 pound injectors are just as happy on a Bronco as on a Mustang or anything else, including certain Porsches. If EFI Guy sees this he can elaborate more; my 408 idles just fine with them, pulls happily to 5500 rpm etc. They are popular because even though they can flow a lot at the high end, they also meter well at idle.
Thanks. Thats good to hear. What kind of throttle body and maf are you running? And what did you do for an ecu / tuner?
 
OP
OP
4x4man514

4x4man514

Contributor
Bronco Guru
Joined
Aug 28, 2003
Messages
1,157
Loc.
Augusta,Georgia
So can someone tell me which of these injectors are the ones i need?
 

Attachments

  • 20240614_105802.jpg
    20240614_105802.jpg
    129 KB · Views: 77

duffymahoney

Contributor
Bronco Guru
Joined
Apr 26, 2015
Messages
2,734
Picking injectors is a science, spray patterns being what you want to look at first. Most modern injectors are a V stream, which you do not want on a 302 intake. You should copy fords stock spray pattern, which I am guessing is a narrow cone. Then you do the math online and see how big of an injector you need. Getting too big means you will cause some issues for idle.

I know a lot of guys use the explorer injectors which are 17lb or 178cc, which should be plenty for your needs.
 

lars

Contributor
Been here awhile
Joined
Jun 29, 2001
Messages
3,334
Loc.
NorCal flatlands
So can someone tell me which of these injectors are the ones i need?
EV1s are what I have. Again, tuners seem to love them because they meter accurately at very low duty cycles and don’t cause idle problems. They certainly didn’t in my case.
 

lars

Contributor
Been here awhile
Joined
Jun 29, 2001
Messages
3,334
Loc.
NorCal flatlands
Thanks. Thats good to hear. What kind of throttle body and maf are you running? And what did you do for an ecu / tuner?
I am using a 75mm Accufab throttle body. I have been using a 90mm Ford Lightning MAF but in my latest iteration I switched to a PMAS 95mm MAF tube and a stock Ford 2010-ish (don’t recall the exact application) per tuner’s recommendation. I am switching from EEC-IV (Mustang A9L ECU with a Moates Quarterhorse) to Explorer EEC-V so I have a computer that will operate my newly installed 4R70W natively. I did most of the tuning on the A9L myself starting 20-some years ago, this time I’m getting advice from EFIGuy.
 
OP
OP
4x4man514

4x4man514

Contributor
Bronco Guru
Joined
Aug 28, 2003
Messages
1,157
Loc.
Augusta,Georgia
EV1s are what I have. Again, tuners seem to love them because they meter accurately at very low duty cycles and don’t cause idle problems. They certainly didn’t in my case.
those two i had listed both showed ev1 connectors. but only the more expensive one had it in the title. it claimed "genuine" does that make the other one a knock off?
 

duffymahoney

Contributor
Bronco Guru
Joined
Apr 26, 2015
Messages
2,734
those two i had listed both showed ev1 connectors. but only the more expensive one had it in the title. it claimed "genuine" does that make the other one a knock off?
Most injectors on ebay or amazon are knock offs. Be careful
 
OP
OP
4x4man514

4x4man514

Contributor
Bronco Guru
Joined
Aug 28, 2003
Messages
1,157
Loc.
Augusta,Georgia
I am using a 75mm Accufab throttle body. I have been using a 90mm Ford Lightning MAF but in my latest iteration I switched to a PMAS 95mm MAF tube and a stock Ford 2010-ish (don’t recall the exact application) per tuner’s recommendation. I am switching from EEC-IV (Mustang A9L ECU with a Moates Quarterhorse) to Explorer EEC-V so I have a computer that will operate my newly installed 4R70W natively. I did most of the tuning on the A9L myself starting 20-some years ago, this time I’m getting advice from EFIGuy.
i have a holley tb. it measures 2 3/4 inches across the mouth im guessing that makes it a 70mm? aand i beleve the maf is off a cobra so it should be 70mm also?

the more i try to learn about this the more confused i become. from what ive read EFIguy has been really busy and hard to get in touch with lately. it will prolly be a while before im ready to drive it but i do want to at least get it running and the 36# injectors i have wont open. so i need to go ahead and at least get them. and it seems everybodys opinion is split down the middle between deka 60 or 80s or sticking with smaller factory style injectors.
 
Top