• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Viable Tachometer Options?

MerganserMaster

Jr. Member
Joined
Jun 9, 2023
Messages
115
I've been doing a lot of driving with my 1975 302 V8 Bronco recently and have been wondering if/how I should put a tachometer in? The only reason I think this is because I would like to know the RPM in order to not stress the engine too much and to possibly obtain better fuel mileage (currently its about 12.7 mpg). I understand they make OE style steering column mounted tachs but I dislike how much they "stick out" and the $60-70 price tag seems a bit much for what they do in my opinion. I have seen a few aftermarket gauges but they all would require me to cut into the dash or find some other place to mount it. Has anyone found a "good" way to put a tachometer in that allows for easy reading of the rpm and that "fits" well with the interior? (I know that the restomod gauge clusters out there have them built in but thats way out of my budget currently lol)
 

4xfun

Jr. Member
Joined
May 16, 2005
Messages
128
Check amazon or ebay for a digital tachometer. You will be covered up with $20 tachs. They are small and typically used for atv's and motorcycles, but some are set up for 8 cylinder engine when you select the correct switch. The downside is that you are getting a $20 tach that may be of questionable long term quality. You can probably fit one in the ashtray. This is probably not a long term solution, but it you want to get an idea of what your engine speed is, it may give you a look comfort. Most people don't try to rev their engine too high and just use the engine response for an idea of when to change gears. Unless you are racing, your engine should not be screaming at you before you chanve gears. If you can shift to a higer gear and still accelerate going uphill, change to a higher gear. You will usually get the best gas milage will a higher gear. You did not describe your setup or what type of driving is typical, but I would love to get 12.7 mpg.
 

m_m70

Contributor
Bronco Guru
Joined
Jun 14, 2001
Messages
1,770
Loc.
Prescott AZ
get a roll bar mount. if you don't have a roll bar, invest in one before a tach.
 

Master Chief

Contributor
Bronco Guru
Joined
Nov 24, 2006
Messages
1,312
As you can see in my photos, you can tuck a steering column mounted tach under the dash pad and still pull the light switch out to on.
 

Attachments

  • IMG_7467.jpg
    IMG_7467.jpg
    160.9 KB · Views: 149
  • IMG_7469.jpg
    IMG_7469.jpg
    148.6 KB · Views: 165

DirtDonk

Contributor
Bronco Guru
Joined
Nov 3, 2003
Messages
51,650
And I hate to say it regarding pricing, because I know how expensive everything is these days. But $60 for something that was $25 dollars up to 50 years ago, doesn’t sound that bad!
I think I paid $24 in 77, for the Sun tach that is still in my Bronco.
But I like the idea of a small digital tach mounted somewhere out-of-the-way that you could check every once in a while.
Same thing for a little voltmeters that plug into your cigarette lighter, or mount to panel out-of-the-way.
Always nice to know what the engine is doing. Especially to find out that what you thought was over revving, turns out to be under 3000 RPM!
These things make a lot of that kind of noise. :)
 
OP
OP
MerganserMaster

MerganserMaster

Jr. Member
Joined
Jun 9, 2023
Messages
115
Check amazon or ebay for a digital tachometer. You will be covered up with $20 tachs. They are small and typically used for atv's and motorcycles, but some are set up for 8 cylinder engine when you select the correct switch. The downside is that you are getting a $20 tach that may be of questionable long term quality. You can probably fit one in the ashtray. This is probably not a long term solution, but it you want to get an idea of what your engine speed is, it may give you a look comfort. Most people don't try to rev their engine too high and just use the engine response for an idea of when to change gears. Unless you are racing, your engine should not be screaming at you before you chanve gears. If you can shift to a higer gear and still accelerate going uphill, change to a higher gear. You will usually get the best gas milage will a higher gear. You did not describe your setup or what type of driving is typical, but I would love to get 12.7 mpg.
Thanks for the advice, my Bronco has a fairly stock 302 (the only modification I have found is headers being added but I suspect there may have been other things done to it) and the stock 3 speed manual transmission. I have found that once I get above 20 mph I have to shift to the third (and final) gear. I try to coast as much as possible and if there are no cars behind me I will only go about 50 mph or so. It is almost at stock height (with a slight, 1" lift in the front) and I have 31x10.5 tires on it currently.
 
OP
OP
MerganserMaster

MerganserMaster

Jr. Member
Joined
Jun 9, 2023
Messages
115
And I hate to say it regarding pricing, because I know how expensive everything is these days. But $60 for something that was $25 dollars up to 50 years ago, doesn’t sound that bad!
I think I paid $24 in 77, for the Sun tach that is still in my Bronco.
But I like the idea of a small digital tach mounted somewhere out-of-the-way that you could check every once in a while.
Same thing for a little voltmeters that plug into your cigarette lighter, or mount to panel out-of-the-way.
Always nice to know what the engine is doing. Especially to find out that what you thought was over revving, turns out to be under 3000 RPM!
These things make a lot of that kind of noise. :)
I think I will go with this option for now and then once I have an idea of what the RPM vs noise correlation is I might remove it. And you are absolutely correct my Bronco is very loud for it being a 302 with no apparent modifications (other than headers)
 

DirtDonk

Contributor
Bronco Guru
Joined
Nov 3, 2003
Messages
51,650
I drove my bronco daily for many decades. When I first got it, it had dual exhaust with glass packs. Even though it wasn’t super loud, and didn’t have a lot of droning, it was shocking the difference in apparent RPM after I put on a set of turbo mufflers. All of a sudden, everything worked better, especially at lower RPM. Fuel EConomy went up slightly, but my perception of how fast the engine was spinning went way down!
Just from the exhaust!

Other than the exhaust, mine was almost 100% stock. Cut rear fenders with 31, then 32 inch tires and 4.11 gears. Felt like I was spinning the engine up, when I really wasn’t.
Driving was a lot more fun after that! :)
 

73azbronco

Contributor
Bronco Guru
Joined
Nov 11, 2007
Messages
8,781
just get a dongle and read it off the OBD port....

Seriously, a vacuum gage might be better to improve MPG.
 

73azbronco

Contributor
Bronco Guru
Joined
Nov 11, 2007
Messages
8,781
I drove my bronco daily for many decades. When I first got it, it had dual exhaust with glass packs. Even though it wasn’t super loud, and didn’t have a lot of droning, it was shocking the difference in apparent RPM after I put on a set of turbo mufflers. All of a sudden, everything worked better, especially at lower RPM. Fuel EConomy went up slightly, but my perception of how fast the engine was spinning went way down!
Just from the exhaust!

Other than the exhaust, mine was almost 100% stock. Cut rear fenders with 31, then 32 inch tires and 4.11 gears. Felt like I was spinning the engine up, when I really wasn’t.
Driving was a lot more fun after that! :)
My fastest sounding car, straight six 170 1965 econoline with thrush muffler. Future wife could hear me coming a mile away, the van that is.
 

JSBX

Contributor
Sr. Member
Joined
Mar 10, 2010
Messages
652
Check out Max Tow gauge mount tachometer. They fit in a 2 1/16 gauge mount. I have one mounted under my dash. It is easy to see and works well. You can find them on Amazon for around 60 bucks.
 
Top