• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Engine Builder in SoCal

jeremywatco

Full Member
Joined
Feb 8, 2019
Messages
305
Loc.
San Diego, CA
Howdy,

Finally time to give my stock 302 some much needed love. Want to send it out to be rebuilt but striking out on finding a reputable shop to do the work. Anyone have any recommendations in Southern California area? I'm in San Diego. I was thinking of going with a blueprint bronco crate engine but also feel the 302 I have is totally workable.

Thoughts?

Thanks!
 
OP
OP
J

jeremywatco

Full Member
Joined
Feb 8, 2019
Messages
305
Loc.
San Diego, CA
JBA quoted me $14,000 for a basic rebuild of my 302... thats going to be a no.

I was looking at this on summitracing.

https://www.summitracing.com/parts/HPE-HP99F

Seems to be a stock 302 including flat tappets.. strange thing is when I do a check fitment it says it will not fit my Bronco but I'm assuming thats just because of the oil pain.

Any thoughts on these ATK motors? I am just looking for a stock build basically... a mild cam upgrade would be great but if its bone stock thats fine too. These ATK's say around 240HP which I am pretty sure is a step above my current '73 302.

The BluePrint bronco edition looks super awesome but for almost double the price.

Any thoughts?
 
Last edited:

DirtDonk

Contributor
Bronco Guru
Joined
Nov 3, 2003
Messages
51,650
That 240 is still quite an upgrade over stock.
Assuming that they use net horsepower methods in their ratings, that’s about a 90 hp increase over stock.
If they’re using gross horsepower numbers however, that’s still about 50 hp over stock. Maybe more.

But $14,000 for a basic rebuild? Holy cow, things are worse than I thought.
I’ll have to check with my local shop up here that has done several engines for me over the last 40 years. See if the son or a grandson is feeling the need to raise the prices like that too.
And I thought the last one was expensive at $4000!
 
OP
OP
J

jeremywatco

Full Member
Joined
Feb 8, 2019
Messages
305
Loc.
San Diego, CA
That 240 is still quite an upgrade over stock.
Assuming that they use net horsepower methods in their ratings, that’s about a 90 hp increase over stock.
If they’re using gross horsepower numbers however, that’s still about 50 hp over stock. Maybe more.

But $14,000 for a basic rebuild? Holy cow, things are worse than I thought.
I’ll have to check with my local shop up here that has done several engines for me over the last 40 years. See if the son or a grandson is feeling the need to raise the prices like that too.
And I thought the last one was expensive at $4000!
Yeah I didnt quite get it.. they told me it would be a 3-4 months as well. So yeah...

Hopefully the ATK is reliable.
 
OP
OP
J

jeremywatco

Full Member
Joined
Feb 8, 2019
Messages
305
Loc.
San Diego, CA
Wow. Was that for the Stage I with seasoned block and iron heads?
Thats taking my block and rebuilding. Only real "upgrade" that they mandate is forged pistons and rods.. otherwise not sure what else happens. They said it would be a 400HP motor in the end, even though I told them I wanted a stock build. I bet the do amazing stuff, just not in the realm of my project budget at all.
 

DirtDonk

Contributor
Bronco Guru
Joined
Nov 3, 2003
Messages
51,650
Sounds like they don't listen to their customers very well.
A "stock build" turns into more than double the horsepower of stock? I don't think so. And certainly NOT without heavy modifications.
Or heavy bench-racing lies thrown into the mix!

Paul
 

SteveL

Huge chevy guy
Joined
Jun 24, 2001
Messages
11,969
Loc.
Hawthorne ca
JBA quoted me $14,000 for a basic rebuild of my 302... thats going to be a no.

I was looking at this on summitracing.

https://www.summitracing.com/parts/HPE-HP99F

Seems to be a stock 302 including flat tappets.. strange thing is when I do a check fitment it says it will not fit my Bronco but I'm assuming thats just because of the oil pain.

Any thoughts on these ATK motors? I am just looking for a stock build basically... a mild cam upgrade would be great but if its bone stock thats fine too. These ATK's say around 240HP which I am pretty sure is a step above my current '73 302.

The BluePrint bronco edition looks super awesome but for almost double the price.

Any thoughts?
I'm thinking oil pan and possibly the front dress including timing cover.doez it have the timing kit for a stock fuel pump.
 

DirtDonk

Contributor
Bronco Guru
Joined
Nov 3, 2003
Messages
51,650
Yes, all should fit.
Oil pan AND oil pick up tube! They work together.
Don’t forget to save the dipstick as well.

Front timing cover, and all of it’s accessories.
However, now would be the perfect time to put an Explorer front accessory drive on as well.
It’s pretty much better in every way if you can source one. Contact Sandmann here and see if he has any available.
Maybe the others will remember his exact username. I always get it wrong! :-(
Sandmann3 maybe?
 
OP
OP
J

jeremywatco

Full Member
Joined
Feb 8, 2019
Messages
305
Loc.
San Diego, CA
Seems like I may just look into a non-fully dressed motor. If timing cover and all accessories have to be brought over from the old motor.. all thats really left is the intake and carb which I could source easy. By explorer you mean go to serptentine belt right? Won't I lose the fuel pump by doing that? This is going to be non-efi.
 
Last edited:

SteveL

Huge chevy guy
Joined
Jun 24, 2001
Messages
11,969
Loc.
Hawthorne ca
Just called TG. He said a stock 302 starts about $3k. He recommended going roller cam but it roughly 1400 more. Their number is (310)6793604. Ask for tony
I'm thinking oil pan and possibly the front dress including timing cover.doez it have the timing kit for a stock fuel pump.

Yes, all should fit.
Oil pan AND oil pick up tube! They work together.
Don’t forget to save the dipstick as well.

Front timing cover, and all of it’s accessories.
However, now would be the perfect time to put an Explorer front accessory drive on as well.
It’s pretty much better in every way if you can source one. Contact Sandmann here and see if he has any available.
Maybe the others will remember his exact userna me. I always get it wrong! :-(
Sandmann3 maybe?
doesnt this require an electric fuel pump, and different radiator hoses or radiator configuration? Also possible balancer issues ? Was looking into this swap on my 351w.
 

AZ73

Bronco Guru
Joined
Mar 28, 2012
Messages
3,813
JBA quoted me $14,000 for a basic rebuild of my 302... thats going to be a no.

That was the polite way of saying "get lost". They'd rather spend their time building a high end engine.

I've had several stock GM motor short blocks and heads done in the past at Orange Engine In Anaheim. They've been around for 40 years but don't advertise. It's more word of mouth in the Orange County area.
I can't speak for their work over the past 12 years since I don't live in the area anymore, but they're still in business.

1911 E Ball Rd, Anaheim, CA, 92805, United States
714-635-4030
 
Last edited:

DirtDonk

Contributor
Bronco Guru
Joined
Nov 3, 2003
Messages
51,650
I agree. Just don’t wanna do the work. Too bad

And yes, you guys are correct. Other things need to change.
No fuel pump boss means you have to go for electric
Radiator hoses are different, but solutions exist that don’t break the bank
Damper comes with the explorer accessory front end. But you can use your original damper that’s already balanced for 28oz, and source the adapter pulley like we sell at WH. Probably the least expensive way to go.
Or you’d have to have the Explorer damper balanced to the 302 specification.
Or swap it out for one that it’s already been done. Damper dudes can rebalance them.

So yes, it’s not a pure bolt on. But it is a pretty simple bolt on.
 

Big Ben

New Member
Joined
Feb 19, 2018
Messages
22
Get the passenger side front bracket , buy the drivers from Wild Horses. Sits lower. On my 351
 

Speedrdr

Contributor
Legend in my own mind
Joined
Nov 27, 2017
Messages
2,028
Loc.
Paris, MS
Dang! That makes me feel better about my $6,200 engine. But the build includes a stroker kit (347), AFR heads, roller cam, roller rockers, Edlebrock intake and carb and machine work and balancing the rotating assembly.
 

Molesworth1991

New Member
Joined
Feb 3, 2025
Messages
20
I got another question if anyone could help me.

I just moved to LA, I have a 351w in need of rebuilding ( I think it is salvageable ) does anyone have any engine machine shops in this area worth hitting up to rebuild my engine? Appreciate your help.
 
Top