• Be EXTREMELY cautious if someone offers to buy your Bronco for more than your asking price and sight unseen. ESPECIALLY if the buyer is overseas. It's probably a scam.

    Discuss it more here:
    http://classicbroncos.com/forums/showthread.php?p=514932
  • The Classifieds forum is a place to buy and sell, not an open forum for people to give their opinions on Bronco values. Unless the seller specifically asks for help on pricing, please don't critique quality or asking price. If you're not interested then move on.

    Thanks!
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

NM Original 66 Inline 170 motor - needs rebuild

reinvnt45

Dual Broncos
Joined
Sep 10, 2019
Messages
104
Loc.
Albuquerque, NM
City: Albuquerque
Price: $ 250

Oct 66 bronco build date - original 170 - was saving in case I wanted to build a 66 roadster. Needs to be rebuilt. I ran this motor the first two years after buying the bronco but found a 68 inline 200 to restore. Has a mustang oil pan. Exhuast manifold was dipped, cleaned and graphite finished as I was gonna use it on another block. (I do have the original 1100 Autolite if intersted, additional cost) See all dates cast on block, intakes etc. $250 located in Albuquerque, NM
 

Attachments

  • IMG_1127.jpeg
    IMG_1127.jpeg
    230 KB · Views: 124
  • IMG_1126.jpeg
    IMG_1126.jpeg
    219.6 KB · Views: 130
  • IMG_1128.jpeg
    IMG_1128.jpeg
    245.6 KB · Views: 125
  • IMG_1131.jpeg
    IMG_1131.jpeg
    317.3 KB · Views: 126
  • IMG_1132.jpeg
    IMG_1132.jpeg
    233 KB · Views: 127

Rshackenjos

New Member
Joined
May 12, 2025
Messages
2
Oct 66 bronco build date - original 170 - was saving in case I wanted to build a 66 roadster. Needs to be rebuilt. I ran this motor the first two years after buying the bronco but found a 68 inline 200 to restore. Has a mustang oil pan. Exhuast manifold was dipped, cleaned and graphite finished as I was gonna use it on another block. (I do have the original 1100 Autolite if intersted, additional cost) See all dates cast on block, intakes etc. $250 located in Albuquerque, NM
How much would you be asking for the Autolite?
And I’m in dire need of the original throttle cable bracket the one on mine has be cut into pieces and welded and bent and butchered pretty bad.
Do you happen to have that also?
 
OP
OP
reinvnt45

reinvnt45

Dual Broncos
Joined
Sep 10, 2019
Messages
104
Loc.
Albuquerque, NM
How much would you be asking for the Autolite?
And I’m in dire need of the original throttle cable bracket the one on mine has be cut into pieces and welded and bent and butchered pretty bad.
Do you happen to have that also?
Unfortunately, it’s on my updated auto light 1101. On eBay I found an 1100 auto light carburetor from 68 that had never been opened or used, but it was set up for automatic choke. I took the throttle cable and manual choke brackets off and put them on the new one. I’m currently looking for some more auto lights. There’s a couple of guys in other bronco groups who obviously are ditching. They’re smaller engines for the famed coyote swap. Look for those guys. They have no idea what they have and they give it away for free.
 

Rshackenjos

New Member
Joined
May 12, 2025
Messages
2
Unfortunately, it’s on my updated auto light 1101. On eBay I found an 1100 auto light carburetor from 68 that had never been opened or used, but it was set up for automatic choke. I took the throttle cable and manual choke brackets off and put them on the new one. I’m currently looking for some more auto lights. There’s a couple of guys in other bronco groups who obviously are ditching. They’re smaller engines for the famed coyote swap. Look for those guys. They have no idea what they have and they give it away for free.
Thank you for the reply
 

thegreatjustino

Contributor
Red Head Grease Monkey
Joined
Jan 23, 2002
Messages
16,291
Loc.
Stockton, CA
How much would you be asking for the Autolite?
And I’m in dire need of the original throttle cable bracket the one on mine has be cut into pieces and welded and bent and butchered pretty bad.
Do you happen to have that also?

Is this what you're looking for?
 

Attachments

  • IMG_20250513_221455800.jpg
    IMG_20250513_221455800.jpg
    175.6 KB · Views: 87
Top