• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Project 77

OP
OP
DonH

DonH

Contributor
Sr. Member
Joined
Mar 8, 2013
Messages
487
Loc.
WA State 30 miles from the beach
They don’t always clear out right away. But depending upon how long it’s been sitting, usually a “snake oil“ additive will eventually clear things up.
Unless it was turned over and run with completely dry cylinders, the rings might still be OK. Your compression numbers indicate reasonably good condition.
I wonder if all the smoke was from one cylinder? You said all, but one, but what was the reading on that one?
Number was 85 I sprayed in a little oil and it went up to 125.
 
OP
OP
DonH

DonH

Contributor
Sr. Member
Joined
Mar 8, 2013
Messages
487
Loc.
WA State 30 miles from the beach
Did the previous owner indicate how long the engine had been sitting? Or how many miles on it? Or if it’s original?
Did the previous owner indicate how long the engine had been sitting? Or how many miles on it? Or if it’s original?
I never got to talk with the oner but it was shipped to the US three years ago I think it was shut down at least five years before that.
 
Top