• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Bronco storage

Grey owl

Contributor
Sr. Member
Joined
Nov 19, 2024
Messages
398
20X57 storage rack 8" opening
 

Attachments

  • 20251027_120709.jpg
    20251027_120709.jpg
    142.4 KB · Views: 165
  • 20251027_120524.jpg
    20251027_120524.jpg
    144.1 KB · Views: 163
OP
OP
Grey owl

Grey owl

Contributor
Sr. Member
Joined
Nov 19, 2024
Messages
398
Then go buy some closet racks at Home Depot, they work great. Finally some space to put gear
 

DirtDonk

Contributor
Bronco Guru
Joined
Nov 3, 2003
Messages
51,650
Looks pretty cool. Got closeups of how you mounted it?
Basically laying on the ridge, or held in with brackets?
I figure brackets because of the headliner, but would like to see better.
 

1969

Contributor
Bronco Guru
Joined
Feb 28, 2022
Messages
1,090
Loc.
Reno, NV
I had a rack like that in my 80 series Land Cruiser. It was great for camping - I would stuff my blankets and pillows up there. You could hang things off of the rack. Overall very useful!
 
OP
OP
Grey owl

Grey owl

Contributor
Sr. Member
Joined
Nov 19, 2024
Messages
398
Looks pretty cool. Got closeups of how you mounted it?
Basically laying on the ridge, or held in with brackets?
I figure brackets because of the headliner, but would like to see better.
I put 1/4" foam on the top of window frame to eliminate rattle, cut the piece to fit and added a backet at the back. Its fastened to the rear roof corner supports see pic. The steel shelf piece came from Home Depot. The piece was 72 X 20. Its amazingly ridgid so i did not add a front brace. The front opening is 8" at the center. The shelf is aprox 57 X 20. Its perfect for rifle, axe,small shovel, camping, fishing gear etc. The front is just behind the rear roof cross member so a bracket could be added. That said i am hesitant as to how much that cross member could handle. Its perfect for things like pillows, jackets, camera gear etc.
 

Attachments

  • 20251028_105234.jpg
    20251028_105234.jpg
    80.2 KB · Views: 70
  • 20251028_105257.jpg
    20251028_105257.jpg
    96.7 KB · Views: 75
Top