ntsqd
heratic car camper
This came up in a thread not long ago and I got to thinking about it on the drive to work this morning. I recall, dimly, reading about this a number of years ago and it took me quite a while to wrap my head around how it worked then. When @jamesroney posted about this in whatever thread that was I had to re-think my thru it again because it had been so long since I'd last even thought about it. It was not really the topic of that thread and it was left unresolved. I figured that I'd take a stab at trying to lay it out so that hopefully everyone can see what's going on. If I'm not successful then maybe other's postings in this thread will make it so.
The part that only some understood about being aired down is that one tire revolution moves the vehicle a set distance. This distance changes with the tire's size because the tire circumferences are different, but it does not change with tire pressure. That last part causes a lot of people to say "BS! The tire has a shorter radius, so of course it doesn't go as far as when fully aired up."
That's an easy thing to think and it seems to make sense, but it's wrong.
When the tire had it's air pressure reduced that did not also reduce the length of it's tread. I think that this is the key to understanding what is actually happening. The tire tread is a fixed length regardless of the air pressure. If you think of a tank or Caterpillar track, those are both a fixed length. If we change the diameter of the drive & idler wheels we raise or lower the tank or dozer, but we don't change how far one complete revolution of the tracks will move the tank or dozer unless we add or remove some links from the track.
By lowering the air pressure in the tire we've changed the size of the "drive wheel" and altered the torque multiplication ratio, but we have not changed the length of the tread. One revolution of the tire still moves the vehicle whatever the circumference of the tire is. Obviously there can be some slip between the tread and the ground, but the same is also true of the tank or dozer tracks. Let's uncomplicate this sightly by saying that the tire never slips on the ground. This isn't real ALL of the time, but it is real MOST of the time and I hope it makes this easier to figure out.
The part that only some understood about being aired down is that one tire revolution moves the vehicle a set distance. This distance changes with the tire's size because the tire circumferences are different, but it does not change with tire pressure. That last part causes a lot of people to say "BS! The tire has a shorter radius, so of course it doesn't go as far as when fully aired up."
That's an easy thing to think and it seems to make sense, but it's wrong.
When the tire had it's air pressure reduced that did not also reduce the length of it's tread. I think that this is the key to understanding what is actually happening. The tire tread is a fixed length regardless of the air pressure. If you think of a tank or Caterpillar track, those are both a fixed length. If we change the diameter of the drive & idler wheels we raise or lower the tank or dozer, but we don't change how far one complete revolution of the tracks will move the tank or dozer unless we add or remove some links from the track.
By lowering the air pressure in the tire we've changed the size of the "drive wheel" and altered the torque multiplication ratio, but we have not changed the length of the tread. One revolution of the tire still moves the vehicle whatever the circumference of the tire is. Obviously there can be some slip between the tread and the ground, but the same is also true of the tank or dozer tracks. Let's uncomplicate this sightly by saying that the tire never slips on the ground. This isn't real ALL of the time, but it is real MOST of the time and I hope it makes this easier to figure out.











