• Just a reminder that you won't be able to start new posts or reply to existings posts in the Archive forum.

    This is where all the old posts go so they can still be used for reference and searched.
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Contacting Ryan

76 bronco J

Bronco Guru
Joined
Oct 20, 2005
Messages
1,480
,,,,,,I found ryan's old reponses from summer of 06' on ( www.nloc.net) that's the national lightning owners club,,,,,,his name over there is ( fireguy50),,,,,http://www.nloc.net/vbforum/showthread.php?t=129758 ,,,,, found that when I was searching around was looking for info on the new improved EFI harness from ford part #M-12071-A50 just for the hell of it,,,,, I know ryans one piece harnesses are badass/ plug directly into the bronco(even if that's just a few wires) & delete certain emission stuff which people like ,but the new ford harness looks pretty good except for the $650 suggested retail price,,,,one thing for this situation is it uses the EGR emission stuff and is available now ,,,,,this new harness is one piece with intergrated injector & O2 harnesses , with compact relay box & check engine light plus electric fan output control http://www.fordracingparts.com/parts/part_details.asp?PartKeyField=9631 ,,,I actually been thinking about going with fuel injection since I've been helping a friend with his stang project because it does seem rather simple after really looking at everything & he's racking up free parts by the minute I can use since he's now mister 9psi supercharger through AFR 165heads with the new BBK SSI intake ,,,,pic below is progess as of wed. night....speaking of I better get going>>>>>>>>>>>>>>>>>>>
 

Attachments

  • 100_0224-6666.JPG
    100_0224-6666.JPG
    151.6 KB · Views: 74

904Bronco

Contributor
Bronco Guru
Joined
Sep 28, 2004
Messages
6,720
Loc.
San Martin, CA
,,,,,, I was searching around was looking for info on the new improved EFI harness from ford part #M-12071-A50 just for the hell of it,,,,, I know ryans one piece harnesses are badass/ plug directly into the bronco(even if that's just a few wires) & delete certain emission stuff which people like ,but the new ford harness looks pretty good except for the $650 suggested retail price,,,,one thing for this situation is it uses the EGR emission stuff and is available now

I spoke with FMS Rep today, the new harness does not have the emission equipment in place. No EGR, TIB, TAB, ETC. The price is steep... But it looks like a clean piece to install.
 
OP
OP
MarsChariot

MarsChariot

Contributor
Planetary Offroader
Joined
Oct 12, 2004
Messages
2,605
Loc.
Albuquerque, New Mexico
904Bronco,
Yes, I have been looking at that. And, yes, the engine harness is the snag there. An old brittle engine harness is about the only way to use the new main harness though. Might have to if all else fails.
76 bronco J,
Yes, I have seen that but have not been able to find much information. Summit has it, and they usually post the manual with the Ford racing harnesses, but not this one. So it is difficult to find out what the “catch” would be with that one.
On another note, does anybody known anything about this one from Quality Automotive Specialties? What is that weird “panel” that all the wires connect to? Has all the emissions connections, but looks like a tab A into tab B situation for sure. Did telephone tag with the guy today, so I was not able to get the full story.
http://www.qualityautospecialties.com/cart/product_info.php?manufacturers_id=10&products_id=30
 

FFMDX

Sr. Member
Joined
Mar 12, 2004
Messages
542
Loc.
Roseville, CA
I wonder if BCB has the same probs with contacting Ryan as everyone else, being they carry his harness?:?
 

76 bronco J

Bronco Guru
Joined
Oct 20, 2005
Messages
1,480
,,,,,, I was searching around was looking for info on the new improved EFI harness from ford part #M-12071-A50 just for the hell of it,,,,, I know ryans one piece harnesses are badass/ plug directly into the bronco(even if that's just a few wires) & delete certain emission stuff which people like ,but the new ford harness looks pretty good except for the $650 suggested retail price,,,,one thing for this situation is it uses the EGR emission stuff and is available now

I spoke with FMS Rep today, the new harness does not have the emission equipment in place. No EGR, TIB, TAB, ETC. The price is steep... But it looks like a clean piece to install.

,,,,,,,I'm not sure that tech rep/saleman is right & it sure wouldn't be the first time from them or other companies,,,,maybe he is right or was thinking you meant it came with the other sensors or maybe the following info is wrong,,,,.....there is part #M-12071-K302 sensor & relay package http://www.fordracingparts.com/parts/part_detailspf.asp?PartKeyField=5009 , which is says to be used with M-12071-A50 or the M-12071-C302 you mentioned,,,,,what's yalls' take on this?????
 
OP
OP
MarsChariot

MarsChariot

Contributor
Planetary Offroader
Joined
Oct 12, 2004
Messages
2,605
Loc.
Albuquerque, New Mexico
,,,,,,,I'm not sure that tech rep/saleman is right & it sure wouldn't be the first time from them or other companies,,,,maybe he is right or was thinking you meant it came with the other sensors or maybe the following info is wrong,,,,.....there is part #M-12071-K302 sensor & relay package http://www.fordracingparts.com/parts/part_detailspf.asp?PartKeyField=5009 , which is says to be used with M-12071-A50 or the M-12071-C302 you mentioned,,,,,what's yalls' take on this?????

It is possible there was a mis-communication because the Ford Racing site specifically lists an "EFI Sensor Package (M-12071-N302)"
http://www.fordracingparts.com/parts/part_details.asp?PartKeyField=8933
to be "used with M-12071-A50". Yet tracing the wiring and connectors in the fuzzy image of the harness I am not sure I am seeing the relevant connectors at the right locations. More research, as always.
Whoever said it was tough being green sure had it right.
 

mlogan24

Bronco Guru
Joined
Jun 14, 2001
Messages
1,380
Did you try fullsizebronco.com yet? That's where he spends most of his time.
 

904Bronco

Contributor
Bronco Guru
Joined
Sep 28, 2004
Messages
6,720
Loc.
San Martin, CA
Did you try fullsizebronco.com yet? That's where he spends most of his time.

I appreciate all the offers of assistance I have received to "Find" Ryan. But as a consumer, I do not feel that I should have to track down a vendor to get a product that I have already paid for, that was promised in 2-3 weeks. Please do not think that this a "flame job" on Ryan. I truely understand his situation as a one man business and the quality of his product is excellent. But Customer service will make or break any business...

Yes, FFMDX I have spoken with BCB. We exchanged Ph#s, their contact number is the same as the one I have been using. They do not stock on the shelf any of Ryan's EFI harnesses. When they receive a request for one, they contact Ryan and ask for one to be shipped. They also collect customer info, computer number, engine size, etc.

Regarding FMS, I have called Tech support and spoken to two reps and gotten two different stories about the same product... On the web site they refer you to an installation harnes sheet, which I could not find... I suppose that another phone call is in order to confirm.

Ryan , if you are seeing any of this I would have to say that I would still buy your products. But you would have to be sitting right in front of me and your product would need to be there with you.

Doug
 

904Bronco

Contributor
Bronco Guru
Joined
Sep 28, 2004
Messages
6,720
Loc.
San Martin, CA
We normally don't have a problem contecting him.

Thats what Roxanne said Chuck. My thanks to her for listening to my story and at least confirming I was using a good number. I hope he does not have any new drama/sickness/etc, in his life. But if he did, all he would have half to do was call me and let me know he needed more time.
 

904Bronco

Contributor
Bronco Guru
Joined
Sep 28, 2004
Messages
6,720
Loc.
San Martin, CA
Ryan has not responded to my attempts to contact him. I tried to call Ryan this morning, his phone mailbox was full. I sent him an e-mail cancelling my order.:( I also contacted my CC company to dispute his charges. I regrete that it has come to this...

Mars,

I am sorry about hi-jacking your thread...
 
OP
OP
MarsChariot

MarsChariot

Contributor
Planetary Offroader
Joined
Oct 12, 2004
Messages
2,605
Loc.
Albuquerque, New Mexico
Ryan has not responded to my attempts to contact him. I tried to call Ryan this morning, his phone mailbox was full. I sent him an e-mail cancelling my order.:( I also contacted my CC company to dispute his charges. I regrete that it has come to this...

Mars,

I am sorry about hi-jacking your thread...

904Bronco,
You didn't hi-jack the thread. I think you answered my original question with a pretty good example.
I must say that I am not looking forward to the splicing and wiring that is going to happen with the necessity of using some other harness. But refusing to delete EGR and canister purge from an EFI conversion appears to be a revolutionary idea. So be it.
 
Top