It looks a good bit taller that Chucks' top. Does it create more drag going down the road?
It's about 2 1/2" taller than a hard top. Slightly taller than the STC top and slightly lower than the Bestop. Since the radius at the center hoop is about the same on both they can't be too much different in height.
Here are a few of the less obvious feature details.
1: Top section sewn into a single section to prevent leaking. Early proposals included adding a zipper in the center (2 piece top section) and/or putting a sunroof in. Both were rejected since they are almost certain to leak. The front section can be rolled back though.
2: Aluminum frame. This includes the bed rails, windshield riser, and the door frames. The door frames are set up to accept a stock door seal.
3: Heavy Duty Stainless hoops. The stainless has 2 advantages. One is corrosion resistance and the other is strength. With a rack on top it will support a great deal of weight. (I've tested it up to about 400 lbs.)
4: All stainless marine hardware. (bolts, hinges, screws, rivets, etc.) Again this is for corrosion resistance.
5: Sea Mark marine fabric. The Sea Mark is Sunbrella on the outside with a vinyl coating on the inside which makes it waterproof rather than water resistant. It costs about twice as much as regular Sunbrella.
6: The windows can be rolled up or can be unzipped and removed.
7: Thick pressed sheet DOT approved windows. The pressed sheets windows have better clarity and do not degrade as fast as the rolled plastic.