• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Preferred big bearing housig

bigjhoov

nobody
Joined
Apr 10, 2005
Messages
3,583
I'm upgrading my 9" to a big bearing. I have access to pretty much any one I want. Which one should I look for. Was considering getting one of the torino style since there are a couple of disc brakes that work on them.
 

Apogee

Contributor
Bronco Guru
Joined
Nov 26, 2005
Messages
6,348
Loc.
Tangent, OR
You'll have the most disc brake options with the Torino housing (2.00 x 3.56) pattern and 2.5" brake offset dimension but they tend to go for $$$ because the Mustang guys covet them.

I would pull a 31 spline out of a 1977 or later F150/E150/BigBronco and cut it down to whatever width you want and convert to Torino ends. All said and told you should only be into it a few dollars more and you'll have 31 spline axles and the brakes you want instead of the brakes that'll fit.
 

byson1

Sr. Member
Joined
May 27, 2004
Messages
649
Loc.
Nashville
You'll have the most disc brake options with the Torino housing (2.00 x 3.56) pattern and 2.5" brake offset dimension but they tend to go for $$$ because the Mustang guys covet them.

I would pull a 31 spline out of a 1977 or later F150/E150/BigBronco and cut it down to whatever width you want and convert to Torino ends. All said and told you should only be into it a few dollars more and you'll have 31 spline axles and the brakes you want instead of the brakes that'll fit.

This one's new to me. I'm curious as to what year Torino's had this and what's the advanatge?
 
Top