Community
Buy / Sell
James Duff Rust Bullet Sexton Offroad
Bronco Tech
Ford Bronco Parts - Classic Vintage Early Bronco Parts
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.
W

Wallajw

Contributor
New Member
Joined
Last seen
Messages
17

Latest activity Postings Images About

    • W
      Wallajw replied to the thread My Imported Bronco Body.
      these are all over Facebook market place, i believe there is a few dealers around the US that sell the imported bodies, at least that is...
    • W
      Wallajw replied to the thread Ax15 leaking bad…..
      i tapped mine for a 1/4" pipe plug rather than using RTV, it has oil in it but i have not driven it yet but so far no leaks
    • W
      Wallajw reacted to steelworker77's post in the thread BP 347 has left the chat with Like Like.
      Back on the road! This motor is loads quieter. Only thing I noticed and I will need to call them tomorrow is they reused my same...
    • W
      Wallajw replied to the thread BP 347 has left the chat.
      im not going to turn someone else's post in a different direction or argue with someone on the internet we all know how that goes but...
    • W
      Wallajw reacted to nvrstuk's post in the thread BP 347 has left the chat with Like Like.
      I was pre- priming engines back in the '70's. I'm with Wallajw... Still do it today & will never stop doing it. It's what I do & to...
    • W
      Wallajw replied to the thread BP 347 has left the chat.
      you do know you can use an external pressure tank with oil in it and force oil through the engine to prime engines like an LS or coyote...
    • W
      Wallajw replied to the thread Wildhorses fuel tank.
      thanks all, I'm going to make some brackets to hold the 4 corners like the original. ill keep the fill tube 1/4-1/2 inch off the frame...
    • W
      Wallajw reacted to jamesroney's post in the thread Wildhorses fuel tank with Like Like.
      You are overthinking this: There is an easier way to locate the tank. The fill neck on your M1A1 tank is welded in place, and can only...
    • W
      Wallajw replied to the thread Wildhorses fuel tank.
      Im still going to have it supported on the bottom i just want to be able to install it without the body on the frame. The high capacity...
    • W
      Wallajw posted the thread Wildhorses fuel tank in Bronco Tech.
      Hello Im installing a wild horses 23 gallon tank on the frame without the body bolted on and im wanting to make some brackets similar...
    • W
      Wallajw replied to the thread My Imported Bronco Body.
      thanks for the heads up
    • W
      Wallajw replied to the thread My Imported Bronco Body.
      good to know i have been thinking about ordering a carpenters grill so it has the ford letters stamped but i may just get the ford...
    • W
      Wallajw replied to the thread My Imported Bronco Body.
      Here are some pictures of the front grill fitment to the lower fenders. Will take a little work but nothing to difficult and I totally...
      • 20260804_192652.jpg
      • 20260804_192706.jpg
    Show older items
  • Loading…
  • Loading…
  • Loading…
Top