• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.
R

Latest activity Postings About

    • R
      rojo23 reacted to DC_Gearhead's post in the thread Wiring power seats with Like Like.
      I bought Tesla seats and just tested wires in the harness until I found the right ones. Then made this cool switch panel. The push...
    • R
      rojo23 reacted to m_m70's post in the thread Wiring power seats with Like Like.
      I have the seats out of 2015 mustang convertible and just have the hot and ground wired up directly. No problems..................
    • R
      rojo23 replied to the thread Wiring power seats.
      Not really sure what it means either, fingers are faster than my brain sometimes. I was just asking if I would need a relay or just...
    • R
      rojo23 posted the thread Wiring power seats in Bronco Tech.
      i recently picked up 2 2016 power mustang seats. These are non-memory seat, but are power. I was able to hook up a battery pack and...
    • R
      rojo23 reacted to DirtDonk's post in the thread clutch adjustment with Like Like.
      And that upper bump stop is on a center pivot that’s an eccentric. If you turn it the rubber changes height, changing where the pedal stops
    • R
      rojo23 reacted to BUCKWILD's post in the thread clutch adjustment with Like Like.
      Yes it will go to the floor, with carpet or a mat you will not notice it. All clutches are that way including new trucks or cars, or at...
    • R
      rojo23 reacted to DirtDonk's post in the thread clutch adjustment with Like Like.
      If there is enough tavel in the linkage, I believe the pedal can go all the way to the floor. If you had a thick floor covering on it...
    • R
      rojo23 replied to the thread clutch adjustment.
      I have not driven it in a while, just noticed it when I installed the pedals. I did see an upper bump stop, but nothing to limit the...
    • R
      rojo23 posted the thread clutch adjustment in Bronco Tech.
      I replaced my front floor pans due to rust. I just installed my clutch and brake assembly back in, but now when i push the clutch in...
    • R
      rojo23 reacted to DirtDonk's post in the thread Fuse box location with Like Like.
      There aren’t a ton of them in use I don’t think, but a recurring theme seems to be along the driver side kick panel behind the parking...
    • R
      rojo23 posted the thread Fuse box location in Bronco Tech.
      I have a Ron Francis express wiring harness. Where are most people installing the fuse box? I am looking for somewhere with relatively...
  • Loading…
  • Loading…
Top