Community
Buy / Sell
James Duff Rust Bullet Sexton Offroad
Bronco Tech
Ford Bronco Parts - Classic Vintage Early Bronco Parts
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.
T

T4x4R

Contributor
Full Member
Joined
Last seen
Messages
217

Latest activity Postings Images About

    • T
      T4x4R replied to the thread Wilwood MC on Hydroboost.
      Yeah probably reeeeaaally low. i think you’re right though. Theres gotta be air somewhere. I thought about starting again and isolating...
    • T
      T4x4R replied to the thread Wilwood MC on Hydroboost.
      Yeah i noticed that as well when i installed it. Ill see if i can widen it w some vice grips or something. Just to confirm though...
    • T
      T4x4R replied to the thread Wilwood MC on Hydroboost.
      Ugh. Bench bled it 4 times. Plus hooked up the tubes back into the MC and triple checked it before i hooked up the lines. Any secrets...
    • T
      T4x4R replied to the thread Wilwood MC on Hydroboost.
      So this might be the issue then. I just ordered a 90 degree elbow to fix the long bend. Is this reservoir the wrong one. That tube...
      • IMG_0430.jpeg
      • IMG_0428.jpeg
      • IMG_0429.jpeg
    • T
      T4x4R replied to the thread Wilwood MC on Hydroboost.
      Thank you everyone! OK, calipers have been re-positioned, copper washers inside and outside are correct now. Banjo Block is flush...
    • T
      T4x4R replied to the thread Wilwood MC on Hydroboost.
      Ok so done - sanity check. This correct?
      • IMG_0380.jpeg
      • IMG_0379.jpeg
    • T
      T4x4R replied to the thread Wilwood MC on Hydroboost.
      Ok, so essentially counter clockwise so the caliper is sitting at the 12 and 6 o clock position? Correct? Update - found a video, yeah...
    • T
      T4x4R replied to the thread Wilwood MC on Hydroboost.
      So - is it installed wrong? Its a lot better after a ton of bleeding but its not quite right yet. This is the drivers side
      • IMG_0377.jpeg
    Show older items
  • Loading…
  • Loading…
  • Loading…
Top