Air Cleaner Swap

[Bronco Blues]

I changed the stock carburetor for a Holley. The sotck air cleaner that I had did not fit the new carburetor due to clearances with the manual choke. I have purchased multiple after market air cleaners that fit the carburetor but not under the hood. A stock air cleaner that will fit is pricey. Anyone have an air cleaner that I can try?

 

[m_m70]

how much clearance do you need to clear the choke? If not much, maybe try a short spacer?? I know it's a balancing act between carb and hood clearance but a short spacer maybe the answer??

https://www.amazon.com/dp/B004AJ3306/?tag=cbama-20

 

[DirtDonk]

I once needed to use two thick air cleaner gaskets and that worked.
Looking back it was probably on my Holley 600.

 

[Bronco Blues]

Thanks m_m70 and dirtdonk. I needed about 1/4" horizontally. I ended up cutting out a section of the air cleaner housing to give the needed clearance.