Which wheels?

[Broncobowsher]

What year are those Dodge wheels? I might be looking for a set for a different project.

 

[eBronc2]

go dodge bro!! not surprised the methods are heavy either. my Raceline wheels are boat anchors too

Just for grins, I weighed them - Methods are 29.8 lbs, Dodge are 24 lbs.

 

[eBronc2]

What year are those Dodge wheels? I might be looking for a set for a different project.

Honestly not sure of the year(s), but just search on CL or FBM, you can usually find a set for a couple hundred bucks. Shop carefully, though, there are several different versions that look very similar, and even some steel wheels that look a lot like them. Good thing with Dodge/Ram is that they still use the old school 8 x 6.5" (8x165mm) bolt pattern. Inspect them carefully, for some reason a lot that I came across had a significant groove worn into them on the inside of the rim, apparently from rubbing on some suspension part. Try to grab the lugnuts, too.

 

[Yeller]

Honestly not sure of the year(s), but just search on CL or FBM, you can usually find a set for a couple hundred bucks. Shop carefully, though, there are several different versions that look very similar, and even some steel wheels that look a lot like them. Good thing with Dodge/Ram is that they still use the old school 8 x 6.5" (8x165mm) bolt pattern. Inspect them carefully, for some reason a lot that I came across had a significant groove worn into them on the inside of the rim, apparently from rubbing on some suspension part. Try to grab the lugnuts, too.

The groove on the inside is due to wheel bearing failures on the front. All makes have this issue.

 

[Tricky Dick]

Dodge

 

[sk1nw4lk3r]

Methods.

 

[ep67bro]

Methods would be my first choice. But you could do a lot worse than the Dodge wheels!

 

[spap]

Ok i chose you. nothing better than 26s on a old bronco

 

[Yeller]

Ok i chose you. nothing better than 26s on a old bronco

🫣

 

[Thomas H.]

Top pic

 

[svobronco]

DODGE!!!