• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

New Bronco Owner

DirtDonk

Contributor
Bronco Guru
Joined
Nov 3, 2003
Messages
48,235
Welcome! Both to Welcome! Both to classicbroncos.com, and bronco ownership!

I would first look up top and check that the valve covers are not coming loose, or just leaking.
Take a peek behind the intake manifold near the firewall and make sure it’s not leaking down from the top.
Then we can work our way around the engine from there.
 
OP
OP
H

harperh

New Member
Joined
Jul 29, 2024
Messages
2
Thank you! Will pop it open and start digging around.


Sent from my iPhone using Tapatalk
 

fluffybunny

Contributor
Newbie
Joined
Oct 28, 2015
Messages
198
Check your oil sending unit, too. After putting a freshly rebuilt engine in and chasing drips, I found my sending unit seeping at the tip where the connector plugs on.
 
Top