Wild horses NP435 to D20

[Johnnyb]

I have acquired a second hand adapter for a NP435 to D20. I have been told and it looks like it is the wild horses part.
Unfortunately the adapter came without the bearing retaining ring and I'm wondering if it is useful as such?

THX,
JB

 

[Broncobowsher]

Contact Advanced Adaptors. They are the ones who really make the kit. With a little onlline digging for the instructions, they might even list the part number.

 

[JB Fab]

AA part numbers
716223 ALIGNMENT RETAINER
716714 "O" RING SEAL
Uses stock Spud-shaft bearing

 

[Johnnyb]

Thanks @JB Fab I'll get those parts on the way. My second hand part might end up costing close to as much as a new part but that's okay.

The idea being to have a complete replacement transfer / transfer case. I rebuilt the NP435 with a kit from Novak and I rebuilt the D20 with your kit and rails.

-JohnyB

 

[Johnnyb]

Or maybe I just splurge on an Atlas, then I don't need the ring!

 

[thegreatjustino]

https://www.wildhorses4x4.com/early-bronco-dana-20-transfer-case-adapter-bearing-retainer