• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Searching for vendor in eastern ohio finish project

Pops68

Contributor
Bronco Rookie
Joined
Oct 11, 2010
Messages
1,775
Loc.
Bazetta Township
You may want to be a bit more specific on both your location and what needs completed on your Bronco.

Your post is somewhat vague.
 
OP
OP
E

Ephatha Solutions

New Member
Joined
Aug 29, 2026
Messages
4
Thank you. I will try to be a bit more specific without writing a novel. Currently every thing on this has been rebuilt or new, sandblasted and painted with por15. Frame has dual shocks from james duff. 351w, zf5 sp, np 205, new radiator with Ron davis shroud. Needs a cable drive case shifter. Has the bigger rear brakes and converted to discuss in front. Need driveshafts made and brakes put on along with stainless brake lines run and booster installed. Rear axle has new seals and fuid. Front axle needs seals replaced. Pedals all rebuilt and ready to bolt in. Would like to install a different steering column. There is not a hole punched thru firewall as of yet. Has the big upgraded gas tank with heavy skid plate. I can and do syart the vehicle and let it run for a while with open headers. It has a kentriol fiberglass body with both product of lizard skin on bottom and tub has raptor bed lines sprayed. Inside. Would like a full roll cage where the seat bolt to it. I have a metal tailgate, hood, and windshield frame that have minimal rust. I have a set of metal doors with ma y layers of paint on it, they need completely redone and or tra sfer part to the set of fiberglass doors I have. I have inner and outer fiberglass fenders and grill that are jot installed or have any parts on them. It need a complete new wiring harness as there is none. Also needs tail lights ect. I would like to know and have the fuel injection that replaces the carb. No fuel lines run at this time, I just have a law mower gas tank hanging to fire it up once in a while. I have 31" wheels Nd tires that just for rolling it around, I would like to go 35" on 17". It has 2.5 on suspension and 2 on body lift. Thats my attempt at an abbreviated version of what I am looking for in eastern ohio. Thank you if you spent the time to read this.
 

Pops68

Contributor
Bronco Rookie
Joined
Oct 11, 2010
Messages
1,775
Loc.
Bazetta Township
That should help - it's a lot of work to do yet.

More specific location would be helpful too..... eastern Ohio is 1/2 the state, depending on where you 'draw the line between east and west'.
 
OP
OP
E

Ephatha Solutions

New Member
Joined
Aug 29, 2026
Messages
4
I moved from Butler pa to youngtown ohio area a couple yrs ago. The only reason I got the project as far as it is was because of all the help, advice, and searching threads on this site. I took yrs off from working on it, forgot my user name and password then just recently created new credentials. Thank you
 

Pops68

Contributor
Bronco Rookie
Joined
Oct 11, 2010
Messages
1,775
Loc.
Bazetta Township
Not sure, but we may have conversed on here years ago also. I'm in Trumbull County, not far from Youngstown.
Sorry, but I can't help with any recommendations for needed help.

Pops
 
OP
OP
E

Ephatha Solutions

New Member
Joined
Aug 29, 2026
Messages
4
Not sure, but we may have conversed on here years ago also. I'm in Trumbull County, not far from Youngstown.
Sorry, but I can't help with any recommendations for needed help.

Pops
We may have talked yrs ago .my former user name was zeusakira. We live in girard currently.
 
Top