• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Search results

  1. Bronco-Brian

    Hard start after carb rebuild

    Make sure to check that accelerator pump squirts fuel to the venturi when you step on the throttle (cold engine and hot engine) - also check function when choke is closed. Sometimes the closed position choke linkage limits the accelerator stroke. Lastly, make sure your fuel pump check is...
  2. Bronco-Brian

    OR Crawler Bronco Project

    Have you looked at this one? https://portland.craigslist.org/mlt/cto/d/portland-1969-bronco/7352524589.html
  3. Bronco-Brian

    Transmission question

    Hi, I'm running a 4R70W using US Shift controller. They have a guide on connectors. The one you ask about above is the selector shaft range switch. This link should help you. Ask monster what type they use, or if you have a donor (like from explorer) you can look at it to find out. BTW, I...
  4. Bronco-Brian

    Vent Window Hinge question

    Hey Sporto (Rich) - stainless hinge drilled like butter using sharp cobalt 5/32 drill bit. Pic shows my sequence leaving glass in place, you can skip 4 and 5. Step 6 is plug weld to your good frame using mig welder. Clean everything with grinder and remove any grease or paint. Cover all...
  5. Bronco-Brian

    Vent Window Hinge question

    The spot welds on the stainless frames don't seem to hold as well as the painted steel ones. I've got several broken just like yours. I'll work to repair one and let you know what I find. Either way, I think the glass will need to come out for reweld or rivet. Brian
  6. Bronco-Brian

    Turn signal switch

    Assuming you reuse the factory connector from the old turn signal (t/s) switch. Strip out all the old wires/pins from the t/s switch side connector (coming from the column). Plug the 2 connectors (plastic ones) together. Then follow the color code and insert the pins to the plastic...
  7. Bronco-Brian

    Turn signal switch

    These can be tricky - I always use the Tom's schematic as different years use different colors and it can cause confusion. Also, I connect the t/s connector to the main harness before pushing in the t/s pins to it. This helps me keep them all straight - but must know the color to color...
  8. Bronco-Brian

    GA Vent Window Assemblies

    I've got a set I can sell. email me and I'll send photos. Brian
  9. Bronco-Brian

    SOLD 1966 Turquoise U14 in Portland

    Selling my 1966 HalfCab U14. Was just on BaT, but just missed reserve. It's an early Nov '65 Budd body truck with an updated 200 6cyl. You can see details in either of these links: https://bringatrailer.com/listing/1966-ford-bronco-44/...
  10. Bronco-Brian

    Rear Seat Wood Dimensions

    Go to this thread. https://classicbroncos.com/forums/showthread.php?t=259008
  11. Bronco-Brian

    OR Stock 1974-1977 Steering Wheel w/ Horn Button

    Need a stock steering wheel for my '77. Have a nice Tom's 13 3/4" wheel p/n 7035s to trade plus cash. Minor cracks are OK - please send pic. Thanks
  12. Bronco-Brian

    SOLD Ranger Green houndstooth front bucket seats

    Pictures say it all on condition. Good tracks, no rust, no pass hinge brackets though. $475 plus buyer pays shipping
  13. Bronco-Brian

    SOLD 1977 rear axle housing - large bearing price drop to $550

    Price lowered to $575. Can't change it in the listing. Hope somebody can use this - kinda rare.
  14. Bronco-Brian

    New Bumpers - Powder Coat or Custom Paint?

    I have the same bumpers. I went with powdercoat to thoroughly cover everywhere so no rust will generate in the cracks/crevasses near welds. Powdercoat is way tougher than even the best urethane paints. I also applied 1 coat of satin clear urethane over the silver vein powder to cut down on...
  15. Bronco-Brian

    SOLD ISO Hard top

    Are you looking for a 66-68, or a later model style? I've got a 66 hardtop for sale.
  16. Bronco-Brian

    FL Vent windows and parts

    Sent you a text - thanks, Brian
  17. Bronco-Brian

    1966 Data Plate Location/ Orientation

    Rivets both ends, horizontal. See pic.
  18. Bronco-Brian

    Flywheel

    Yes 164t 28oz balance. Should be easy to find a used one. I've got a couple. Let me know if you need a photo.
  19. Bronco-Brian

    When to install vent glass assembly

    A couple other tips I've learned on vent windows. Sequence to install is: 1. install door glass first and lower to bottom w/o the stop bumper in place 2. no door beltline felt or window frame felt (vent window vertical felt should be in) 3. door glass vertical felt channels are OK, but keep the...
Top