• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Search results

  1. TNcowboy

    170 stumbles and shakes at lower RPM

    Out of curiosity have you pulled the plugs to read them? Might help diagnose. If they're pretty old, replace them and ( if that doesn't clear it up) drive it for a while and pull them for a more accurate reading
  2. TNcowboy

    170 stumbles and shakes at lower RPM

    Check for a plugged fuel filter. If that's not it...If you still have the Load-a-Matic setup with the 1100 carb, look at float ht, but one culprit that can cause this is a stuck power piston. It is the built in power valve that can get stuck in the bore causing rich or lean problem depending on...
  3. TNcowboy

    SOLD Not Mine !!! A very very nice 1966 U14 up for auction on BAT

    Agreed on the shifter. I'd add the steering wheel too. Doesn't fit the build either IMO
  4. TNcowboy

    Replacement for Carter YF Carb??

    Mike's Carburetor Parts has a replacement and rebuild kits. https://www.carburetor-parts.com/yfyfapart.html Try and rebuild it first, you'll learn a lot and it's not difficult. Also if you have access to an ultrasonic cleaner it really makes a difference.
  5. TNcowboy

    adding passenger side mirror 1974

    You should consider using Nutzerts; will be a really good upgrade to the install
  6. TNcowboy

    Engine Rebuild & other stuff

    I've used Macon Diesel for years in Lafayette TN for my diesel trucks but they work on everything. Always treated me real well. They're an hour away from me but worth the drive https://macondiesel.com
  7. TNcowboy

    First steps to my new Shop......

    Congratulations Keep the updates coming
  8. TNcowboy

    31S Gllatin, TN

    After this past week I'd say we've earned it
  9. TNcowboy

    Any Bronco junkyards?

    Nick at https://northeastclassicfordparts.com/ has a lot of used and nos parts
  10. TNcowboy

    Best Mechanic for EFI Conversion Found

    Dig those Elvis Presley sideburns
  11. TNcowboy

    Super Celebration East Roll Call

    I'm about a half hour to your east. I'm using a buddy down in Georgia for the body work. He does great work but he's backed up about a year Shoot me a dm if you want
  12. TNcowboy

    71 bronco inline 6 stalling out on incline

    You probably nailed it. Fuel filter has been mentioned but Another thing to check is the fuel pump, but I'd look at the float setting first. Be sure that the float is not only the right height but also that the float is parallel to the carb gasket surface. I've seen issues with a float being...
  13. TNcowboy

    Super Celebration East Roll Call

    We'll be there with the 75 if it's done...with the 67 if it's not 75 is in paint now...here's a couple pictures of the top he sent this morning
  14. TNcowboy

    TX Ted Nugent’s 68 Halfcab

    I remember when celebrities put their footprints in wet concrete, not bronco hoods
  15. TNcowboy

    OK 1969 Wagon 302 3-speed

    It's listed in Huntsville Craigslist....it's a scam
  16. TNcowboy

    Finally got her out of the stable, but things didn't feel right...

    Here's a better way to bleed that incorporates the brakes. Could be wrong but the video in the other thread missed that. It also is a one man job thru most of the process. Note the number of cycles that are required to be certain there's no air remaining in the system https://youtu.be/AMV_x9WEoqY
  17. TNcowboy

    Finally got her out of the stable, but things didn't feel right...

    I've got hydroboost on a project so I can't discuss hydroboost on a bronco but I've got hydroboost on 3 diesel trucks and they don't steer with any difficulty. Sounds like you may still have air in the lines. Bleeding procedures Just discussed...
  18. TNcowboy

    One part of our hobby that sickens me

    ^^^this^^^
  19. TNcowboy

    One part of our hobby that sickens me

    To be clear..I didn't see it as a high end build (except for the amount that must have been spent what with a $71.5k base project cost). That's why I put in quotation marks.
  20. TNcowboy

    One part of our hobby that sickens me

    Butchering a survivor that has been restored for yet another so called "high end" build is especially wasteful considering the better options available today. Kincer frame that's 2" wider, stronger with Better suspension options and DC bodies make the destruction of an original almost criminal...
Top