• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Search results

  1. TNcowboy

    Who makes the Very Best door rubber??

    I saw that, and if they eliminate the issues with other seals they're worth the added cost.....but only IF they are better
  2. TNcowboy

    Who makes the Very Best door rubber??

    I'm curious if anyone has used Steele weatherstripping and has feedback https://www.steelerubber.com/front-door-weatherstrip-70-2429-72
  3. TNcowboy

    170 inline 6 fuel lines

    Here you go....makes me realize that I need to straighten up some wiring this weekend
  4. TNcowboy

    170 inline 6 fuel lines

    Here you go https://shop.broncograveyard.com/1966-1974-Ford-Bronco-Pump-to-Carb-Line-6-Cyl/productinfo/10293/
  5. TNcowboy

    What's a reasonable cost for machine shop rebuild?

    Agree with Randall If they were going to go that far over budget it should have warranted a phone call. At the least, they need to itemize the overage.
  6. TNcowboy

    The Bid Goes On...

    You might take the high road on this one but that Bronco can't
  7. TNcowboy

    Show me your green Bronco (please)

    Here's my 67 Holly green
  8. TNcowboy

    170 Inline 6 carburetor choke mount

    The 1100 was stock thru 67 since Ford used the Load-a-Matic distributor thru that year; they work in harmony with each other
  9. TNcowboy

    67 with a surge

    Hi Paul Timing is right on and yes I did spray for vacuum leaks and no change in idle. #2 is slightly out of specs so I'm thinking that it might be worthwhile to adjust the valves but that doesn't explain the engine acting fuel starved under acceleration
  10. TNcowboy

    67 with a surge

    Quick update Had some time this evening to do a little more investigation First, the pcv valve is bad. Put your finger over the end while running and the rpms drop almost 200 rpms not the 40 or so that you'd expect. I plugged the hose and test drove. Still surging and acting like it's...
  11. TNcowboy

    Dry Cone Filters

    You can try here, they have the 3570 listed http://www.syntheticwarehouse.com/nanofiber_induction_cone_air_filters.htm Amsoil has the 3550 listed in the pull down menu which appears to have the same specs just 5" instead of 7"...
  12. TNcowboy

    76 won't start, help!

    Sounds like a fuel issue Have you checked...or just change..the fuel filter? Probably the most likely culprit
  13. TNcowboy

    Bronco at Paint

    Looking great Mike Can't wait to see it finished
  14. TNcowboy

    67 with a surge

    Thanks Paul You might be right. I know that these small block 6's are also notorious for cracked intake manifold at the head. Extra frustrating since the two are one casting on these I'll try and dig deeper this weekend. Compression tester due Monday so we'll see about compression then
  15. TNcowboy

    67 with a surge

    I saw that...I was thinking that if you could pull the valve plunger you could do a more thorough cleaning. I could pull the carb again and try to soak it in simple green overnight. I'm getting pretty good at tearing these apart. This'll be 3rd time for this one. The guys at Fordsix.com were...
  16. TNcowboy

    67 with a surge

    Agreed the lots of new parts idea and should have said that I glossed over the process but things were done one step at a time...I just mercifully left out the play by play. Mike's addresses the power valve but only to lube it. He did not address the rebuilding of the valve. I did lube it and...
  17. TNcowboy

    67 with a surge

    Interesting observation One other little wrinkle...earlier this fall wife and I took a 4 hour ride and it ran like a sewing machine. Started surging a week or so later I'm still not convinced that the power valve is operating properly. I know I can get a replacement carb but I'd like to try...
  18. TNcowboy

    67 with a surge

    Firing order is right The vacuum is at 17.5 psi so I doubt that it has a vacuum leak, also that would case those cylinders to be lean. I'm thinking the compression check will throw some light on it. Waiting for it to arrive. My old set is missing the 18mm adapter
  19. TNcowboy

    67 with a surge

    I've got a '67 Bronco with a stock 170...1100 carb and load a matic distributor The idle is slightly rough, but barely perceptible. It does buck and surge when either accelerating or cruising.Vacuum is 17.5 and has a very slight needle wobble...less than an inch of vacuum. Timing is set a 6...
  20. TNcowboy

    23g EFI tank options

    Krawlers Edge uses the Aero pump so you can save on the cost there.
Top