• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Search results

  1. bigjhoov

    AGR Performance

    Not really, Matt Burkette sold it to Josh. He had issues as well, but that's a different story. Years ago Tom Allen(PSC) and Matt Burkette were partners in AGR. Tom left AGR to start PSC and Burkette stuck with AGR. Burkette sold AGR to Josh, and PSC(Tom Allen) has maintained a pretty stellar...
  2. bigjhoov

    AGR Performance

    Yes, I'm well aware of how he operates. I've tried to inform people for years of his business practices, but it fell on deaf ears. People have to learn for themselves sometimes. He will lie even when the truth sounds better. So yes, I know the drill. And it's not just Bronco people. He as done...
  3. bigjhoov

    AGR Performance

    Try here.... (972) 762-0233
  4. bigjhoov

    Steering box rebuild or upgrade

    https://classicbroncos.com/forums/threads/bcb-steering-stiffener-install.258533/
  5. bigjhoov

    Barrett Jackson Broncos 2023

    Looks like a Socks-n-Sandals special!!
  6. bigjhoov

    What have you done to your Bronco today?

    https://www.norcalbroncos.com/forum/forum/norcal-bronco-tech/1290-six-inches-longer?t=1405&highlight=lars+bars http://www.coloradoclassicbroncos.com/viewtopic.php?f=5&t=7043
  7. bigjhoov

    Seat mounting bolt

    I've never seen those, most seats I've seen bolt from the top of the floor to a captured nut. But it explains why the holes in the stock seats are so big. Ive always wondered if they were supposed to use a shoulder bolt of some sort.
  8. bigjhoov

    Why does everyone hate the E303 cam?

    E-303 seems to be a high rpm cam. I have one in a '96 explorer motor that I bought, I'm planning to pull it and put an explorer cam back in. I may even retard it a few degrees for better low end power. Or I might go the Comp Cams 35-349-8.
  9. 20221230_093005reduced.jpg

    20221230_093005reduced.jpg

  10. 20230103_101053reduced.jpg

    20230103_101053reduced.jpg

  11. bigjhoov

    TX registration?

    Go to another office, or a different person at that office. Act like you are there for the first time. Every rep seems to have their own interpretation of the laws, and enforce their own policies. Just keep going back with your documentation until you find one that will process it.
  12. bigjhoov

    Q78-15lt who is running a 35.5x10 on an uncut truck with stock steelies?

    That's not mine, just a truck I've always liked. Pretty sure those are 33x9.50-15 BFG A/T's which were discontinued quite a few years ago. I'd say that's a 2.5" lift if I had to guess.
  13. bigjhoov

    Q78-15lt who is running a 35.5x10 on an uncut truck with stock steelies?

    I've run them. I don't think you will fit them on an uncut.
  14. bigjhoov

    TX 9" small bearing housing

    Did Jim Holy finally run out? I've got a couple, or I can direct you to someone that can narrow one. I don't have an alignment jig.
  15. bigjhoov

    What knuckles do I have?

    Possibly, but it depends on what knuckles and flavor of tie rod ends you have. The Bronco uses smaller factory tie rod ends than the f150 stuff I believe. It gets complicated because you are reverse tapering an existing taper. So, the tapered shims reduce you f150 size TRO taper down to fit...
  16. bigjhoov

    What knuckles do I have?

    There are a variety of inserts or shims depending on which way you go. I think you might be able to get away with an insert like this using the stock knuckles and tie rods, you can either ream them and use a tapered shim, or drill them out and use a tapered insert. You'll want to drill/taper...
  17. bigjhoov

    What knuckles do I have?

    Bump steer comes from different angles and pivot points in the steering/suspension components. You want the angles to be as parallel as possible, have similar pivot points, and on similar planes of travel. Todd can probably elaborate on this as an engineer. Yes, flatter is better but hard to...
  18. bigjhoov

    What knuckles do I have?

    The TRO will make what you have worse. Stock pitman, track bar bracket, and a track bar riser on the axle is the way to go in my experience. From here it looks like a stock pitman would be an improvement over what you have now.
  19. bigjhoov

    Stretched Bronco - Leaf Springs

    Curious who you bought that from. It has some good parts on it that I can see, including a custom Bailie Bilt cage to match the stretch.
Top