• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Search results

  1. bigjhoov

    Proud new Bronco owner..Need advice!

    Get it running and drive it for a while if possible. Jumping in to a long term rebuild can be a daunting task. Create some memories in it first to help pull you through the doldrums of a complete rebuild.
  2. bigjhoov

    Car Hauler Rental

    You can find individuals that will rent trailers on craigslist or marketplace most of the time for $50/day or so.
  3. bigjhoov

    Dana20 TC popped out of 2H

    Pop the inspection plate off and see if there is anything obvious going on before you drop it.
  4. bigjhoov

    Newest project at the shop.

    With a little work you can make a set out of some 3/4" plywood.
  5. bigjhoov

    Newest project at the shop.

    Guniwheel universal shop rollers. https://www.guniwheel.com/shop-now
  6. bigjhoov

    Bronco Shop - Reviews

    Might try FB, he seems pretty active there.
  7. bigjhoov

    Dana20 TC popped out of 2H

    Could be lots of things.....worn detent springs, loose shifter fork inside the t-case, not enough preload on the output shafts. Whatever you do, don't put a bungee or any kind of keeper strap on it to keep it in gear. You can potentially wear out the feet on the shifter fork or widen the groove...
  8. bigjhoov

    Family cage with maximum headroom

    I'm somewhat tall and have built a few cages with max headroom as an objective. The hard part is building within the confines of the hardtop. I built this one to fit as tight as I could to the hardtop as I could get it, within about 1/4". I like to lay the b-pillar back about 5 degrees to keep...
  9. bigjhoov

    Another Chevy Disc Conversion question!

    There were some spacers going around a few years ago that allowed you to use the drum spindle with discs, not sure of their current availability. Some interesting reading here.... https://classicbroncos.com/forums/threads/chevy-disc-swap-using-ford-spindles.122546/
  10. bigjhoov

    Another Chevy Disc Conversion question!

    https://classicbroncos.com/disc_faq.shtml
  11. bigjhoov

    SOLD Wanted: Automatic Shift Linkage Rod Column to C4 Transmission

    Try Jim Holy over in Mesquite, 972-771-034four
  12. bigjhoov

    Need to have steering box rebuild and turn to 4:1 Ratio

    What's your location? There are several places on the west coast that others have used with great success. Red Head, Lee, or Blue top steering come to mind off hand. PSC Motorsports or West Texas Offroad both do great jobs here in Texas. I would avoid AGR at all costs...
  13. bigjhoov

    Need to have steering box rebuild and turn to 4:1 Ratio

    "This is NOT a direct replacement for the factory steering gear box. The Delphi box utilizes different hose fittings and input shaft gear spline size."
  14. bigjhoov

    SOLD 6 cylinder 2 groove water oump pulley

    It's been a while since I've had to source one, but I believe I got my last one on ebay. There are a few listed now. https://www.ebay.com/itm/154706082664?mkcid=1&mkrid=711-53200-19255-0&siteid=0&customid=link&campid=5335857059&toolid=20001&mkevt=1
  15. bigjhoov

    ADMIN Welcome to the new forum software! - List of improvements

    Is there a posts per page setting somewhere?
  16. bigjhoov

    Name that Bronco dude

    I think it might be Jason Hall.
  17. bigjhoov

    Buyer Beware

    He's an interesting character, here's some reading for you...... https://casetext.com/case/lamb-v-state-94
  18. Bronco

    Bronco

    My '66
  19. bigjhoov

    9" Pinon Angle

    Bolt it all up loosely, rotate axle to desired angle, tack perches in place, disassemble and weld perches. Because of the cv at the transfer case you can almost point the pinion right at the driveshaft, but I like to set them with about 2 degrees of downward deflection. The pinion will try to...
  20. bigjhoov

    New Bronco flippers already working it.

    https://dallas.craigslist.org/dal/cto/d/dallas-2021-ford-bronco/7400834654.html
Top