• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Search results

  1. bigjhoov

    Where to take axles for rebuild in N.Texas area?

    https://baertrax.com/
  2. bigjhoov

    200 six fan clutch

    Anyone been able to sneak a fan clutch in on a 200 six? If so, details?
  3. bigjhoov

    Aluminum Tubing for PS - How to form the end?

    It's just a bubble flare, you can do it with a regular flaring tool as well as stated. The mastercool does it better I think. https://youtu.be/sqzj2HqGLDc
  4. bigjhoov

    Aluminum Tubing for PS - How to form the end?

    https://www.amazon.com/Mastercool-71475-PRC-Universal-Hydraulic-Flaring/dp/B007TN15EG
  5. bigjhoov

    Roll Cage Look right

    Looks just like what's pictured on the website, http://broncobob.com/ It just looks funny without the front section, or with imo. The b-pillar need to be straight. Not sure what the point of the back half cages are anyway, might as well get the whole cage.
  6. bigjhoov

    CA Not Mine - Gas Monkey Bronco for sale

    Looks like a standard roll bar accessory mounting clamp from here.
  7. bigjhoov

    "Golden anniversary badge"....

    That's the guy that produced them.
  8. bigjhoov

    Nicks Trix / Helen Keller Customs

    Meh....I'm sure there's more to the story that you're leaving out. I've worked on a couple of Nick's builds, first class work. Let's hear the whole story.
  9. bigjhoov

    Source for 1 Ton TREs and threaded bungs

    http://www.ebay.com/itm/Dana-44-Dana-60-7-8-18-1-Ton-Tie-Rod-Kit-2026-27-2233-34-With-Insert-Jam-Nuts/251578590441?_trkparms=aid%3D222007%26algo%3DSIM.MBE%26ao%3D2%26asc%3D41451%26meid%3Dcc60722c6c0343f9a2991a6bd6e860c6%26pid%3D100005%26rk%3D6%26rkt%3D6%26mehot%3Dag%26sd%3D252034024477&_trksid=p2...
  10. bigjhoov

    Ram Assist Upgrade and Painless Harness Install

    No problems with slippage on any that I've installed, including race vehicles. No issues with the heim on the tie-rod being in single shear either. Here's a clamp that puts it in double shear if you're worried about it...
  11. bigjhoov

    Ram Assist Upgrade and Painless Harness Install

    I'd recommend mounting the ram in double shear on the axle side. I'd also recommend using a tie rod clamp on the tie rod instead of tabs. It makes adjustment much easier. http://www.pscmotorsports.com/motorsport-specific-products/offroad/tie-rod-components/tie-rod-clamps
  12. bigjhoov

    AR OCBR 2017 For Sale-Wanted Thread

    I've got some things I could bring.... EB width 9" housing, 31 spline axles, disc brake kit, no third member. The discs are a little rusty and you'll probably want to install new bearings. $600 obo Stock '66 t-case shifter, straight. $200 Nice stock chrome bumpers, one has two holes on one...
  13. bigjhoov

    Drilling out the remains of a broken set screw

    Can you get to it with a Drexel or small cut off wheel to cut a slot in it and remove it with a flat head screwdriver?
  14. bigjhoov

    DFW meet and greet - Sat, Sept 9

    Meeting at 11am for lunch. Bring the whole family! http://shadysburgers.com/ 2701 Custer Pkwy #915 Richardson, TX, 75080
  15. bigjhoov

    No Gas In TX!

    There is no shortage, stop feeding the frenzy. http://www.wfaa.com/news/local/texas-news/texas-commissioner-dont-panic-about-gas/469658632
  16. bigjhoov

    35 spline full spool for stock 9 inch case

    I didn't take it that way. These things come up sometimes when you're working outside the box.
  17. bigjhoov

    35 spline full spool for stock 9 inch case

    That recommendation might've come from me, since I run one of those spools. I recall having to send a shaft to moser to have a cut and spline done, but I think that was because the shafts that I used were from a wider housing. It's a minor thing to have done. Any of the major players should be...
  18. bigjhoov

    Newbie, looking for Dallas Members

    October https://tinyurl.com/y7elt6e4
  19. bigjhoov

    Newbie, looking for Dallas Members

    September https://tinyurl.com/ya4ocyxc
Top