• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Search results

  1. bigjhoov

    Newbie, looking for Dallas Members

    https://www.facebook.com/events/102340270458058/?acontext=%7B%22ref%22%3A%224%22%2C%22feed_story_type%22%3A%22308%22%2C%22action_history%22%3A%22null%22%7D
  2. bigjhoov

    TX Rear Bumper Tire Rack

    Try Baertrax in Dallas.
  3. bigjhoov

    Where to buy wheels

    You might be better off with the 7" wheel to avoid rubbing the uncut fenders, or the stock 6" wheels.
  4. bigjhoov

    Narrowing a 9"

    Seems as though they are for 3" axle tubes with an i.d. of 2.62". After looking further I noticed that there are both slip in as well as butt weld available. I guess I'm just used to the slip in style in the aftermarket housings. Sorry for any confusion.
  5. bigjhoov

    Narrowing a 9"

    Should've used this style flange. The flange is supposed to slip inside the i.d. of the tube, and weld on the shoulder that's beveled. Not butt welded. You could have done the same thing with the stock flanges by sectioning out a section of the axle tube and butt welding the flange and tube...
  6. bigjhoov

    OK Red Ford locking hub center knob

    Sounds like you might have different hubs possibly. One stock and one superwinch?
  7. bigjhoov

    JD bender, 1 1/2" DOM and 1 3/4" die ...crush the DOM?

    You can make a "cheater" die with a piece of 1.75" tube that is cut in half. The inside of the tube essentially becomes the inside of the die and fills the void that would have been left by the 1.5" tube. The follower die shouldn't matter.
  8. bigjhoov

    CA 16" factory wheels

    I have 10 of them.
  9. bigjhoov

    1969-texas-license-plate

    It's possible that you were told that. I've found that the information received at the tax/title office varies day to day and person to person quite a bit, lol.
  10. bigjhoov

    1969-texas-license-plate

    That's not correct. I currently have YOM plates and antique registration, and have had the same on every bronco I've had. Under VTR-54 from the link above....... If using “old” Texas plates, the plates must be examined at your local county tax assessor-collector's office before submitting...
  11. bigjhoov

    1969-texas-license-plate

    You need two plates in good shape. Be sure you inform them you want to use the year of make plates when you register. Classic registration - over 25 years old, annual registration and inspection, no usage restrictions. Antique registration - over 25 years old, 5 year registration, no annual...
  12. bigjhoov

    Seat relocation bracket

    The same as it will move it backwards. It will move the slider back 2 or 4 inches. Send me a pm.
  13. bigjhoov

    gear reduction

    What happened to the np208 doubler?????
  14. bigjhoov

    Seat relocation bracket

    Yes, it will work for that without modification. You'll just need to turn the bracket around.
  15. bigjhoov

    TX 35" BFG KM2 and US Indy mags

    35/12.50-15 BFG KM2"s and 15x9" US Indy mags. Little to no miles, date on tires is 2016. $1500 obo
  16. bigjhoov

    Detroit locker rebuild

    I've rebuilt a few. If you're replacing just a side gear, it's pretty cost effective. Anything more than that, not so much. I think the side gears are around $150 each, the center gear is $300 or so. To complicate the matter, there are different generations of the lockers. It seems that designs...
Top