• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Search results

  1. BroncoJimbo

    SOLD 28 spline axles large bearings

    I don't want to scrap these if someone can use them. The splines are straight and the bearings are good. The reason I replaced them is the seal on the left axle has worn a groove and wouldn't seal. They might be able to be saved by polishing out the groove or by using a speedi-sleeve.
  2. BroncoJimbo

    Leaking 9"

    The oil spot has been getting pretty big and it looks to me like the seam around the outside of the pumpkin is seeping. I don't suppose there is any other way to repair this other than taking it out to be welded? Ignore my useless attempt at using JB Weld.
  3. BroncoJimbo

    SOLD Stock Bronco seats

    Got a pair of 77 Bronco seats I'm selling for a friend. Decent shape although they could use recovering. Located in N. Georgia. I thought I would list them here first before I put them on Bookface.
  4. BroncoJimbo

    Grant hub adapter issue

    I've had a Grant steering wheel on the Bronco since I bought it in 1990. Recently, I changed the TS switch out (the one I purchased in 2001 or so was broken) and now the horn is on all the time. I can get it to shut off by not putting the wheel on all the way but as soon as I snug it up it trips...
  5. BroncoJimbo

    Fuse Box Replacement

    Hey Gang, This has been the state of my old fuse box for many years. I would say it's less than optimum %) I am thinking of replacing the fuse box with an aftermarket one that uses blade fuses. As anyone else done this?
  6. BroncoJimbo

    Transmission line routing

    Hey Everyone, I am replacing my old transmission cooling lines with a new set from JBG. The ones I had were hacked up with pieces of rubber hoses going to the radiator. My question: How do the stock steel lines route? At what point do they go above the frame? Is it possible to install these...
  7. BroncoJimbo

    Tracking bar bushing replacement

    Hey Gang, The bushings in my tracking bar have gone south. I replaced these 23 years ago but I guess nothing lasts forever.:) Here's the problem... the bolt is seized in the sleeve and won't come out. I've pounded on it some but don't want to bend the bracket. Ideas? I am toying with the idea...
Top