• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Search results

  1. BroncoJimbo

    What have you done to your Bronco today?

    Beautiful. What color is your Bronco?
  2. BroncoJimbo

    Consensus on aluminum radiators

    I've been using them but only due to the cost of a new copper/brass. They are pretty, fit reasonably well but, don't last very long.
  3. BroncoJimbo

    What have you done to your Bronco today?

    The forecast is for rain all week so I am looking at the Bronco and thinking now would be a good time to pull the axles and get the cracked diff welded.
  4. BroncoJimbo

    What have you done to your Bronco today?

    Noticed this. Once more into the breach... Goes nicely with my cracked, leaking rear end. Once I pull the axles, I'll decide if it's time to replace the stock ones or get a sleeve.
  5. BroncoJimbo

    What have you done to your Bronco today?

    Probably the best advice I've seen on this forum (y)
  6. BroncoJimbo

    Please Share Your Marti Report Statistics With The Bronco Community

    Hmmm... Mine looks much more orange but then my wife says I can't see colors.
  7. BroncoJimbo

    Please Share Your Marti Report Statistics With The Bronco Community

    The paint code is 2 - Cayan Red which is really orange.
  8. BroncoJimbo

    What have you done to your Bronco today?

    Thanks, it's worth a try.
  9. BroncoJimbo

    What have you done to your Bronco today?

    Jumped in it to make a beer run and about 1 1/2 miles down the road it quit. It started right back up and I was able to drive home but now what?
  10. BroncoJimbo

    Leaking 9"

    Yeah, I'm a hack welder but a decent grinder.
  11. BroncoJimbo

    Leaking 9"

    Standard, I believe.
  12. BroncoJimbo

    Leaking 9"

    Thanks everyone. I think I will end up pulling it since I need to replace leaking axle seals. Again. I may have to replace the axles since I can't seem to keep them from leaking.
  13. BroncoJimbo

    Leaking 9"

    AFAIK it's the original rear. I've owned it since 1990 but who knows what the PO might have done. It was built 3/3/1976.
  14. BroncoJimbo

    Leaking 9"

    The oil spot has been getting pretty big and it looks to me like the seam around the outside of the pumpkin is seeping. I don't suppose there is any other way to repair this other than taking it out to be welded? Ignore my useless attempt at using JB Weld.
  15. BroncoJimbo

    Turn Signal Intermittent "Super" Cancel

    Well, solved my TS canceling issue. I had the same gawd awful clicking noise and have gone thru several TS switches over the years to solve the problem. Honestly, I can't remember when I had cancelling turn signals. I bought a TS switch from Dennis Carpenter and noticed right away the plastic...
  16. BroncoJimbo

    Best Sticker categories... Post up Best Bronco & related and Oldest Bronco related sticker

    PAW had a huge warehouse in Chatsworth, CA, I think. They did the original machine work on my 351W.
  17. BroncoJimbo

    Turn Signal Intermittent "Super" Cancel

    https://classicbroncos.com/forums/threads/grant-steering-wheel-spring-needed.326882/#post-3586364 That clicking is the tension pins hitting the arm in the wrong place.
  18. BroncoJimbo

    Turn Signal Intermittent "Super" Cancel

    I don't think the depth of the pins or cam is the issue with these Grant hubs. Rather it is the pins themselves and distance from the center of the shaft. I built a plastic plate so I could see what was going on. I posted about this in a recent thread on this same topic. You'll notice the cancel...
  19. BroncoJimbo

    Grant Steering Wheel - Spring Needed?

    Yeah, mine are correctly positioned. It's weird the cam breaks only on the bottom. The next one I get I'm going to file a little away from the top plastic piece because I think that is where the interference is. I built a clear plastic tool so I could see what was happening. From that I surmised...
Top