• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Search results

  1. BroncoJimbo

    Soften ride

    I can't add much to what was already posted but, I'd like to say the Wildhorse's springs and Bilstein shocks transformed the way my Bronco rides. I had the old-school Duff's front springs and shocks and stock leafs.
  2. BroncoJimbo

    Stereo/Bluetooth options 2025

    So... I have an LBC (Little British Car) and like to listen to music but needed the original radio location for gauges. I used a Blaupunkt BT amp mounted in the trunk and a separate BT controller that adheres to the dash. The amp is powerful enough for four speakers, was about $100 and works...
  3. BroncoJimbo

    Cleaning up a 351w

    Consider painting the engine with a brush rather than spraying it. The last two engines I did were painted using an acid brush and KBS or POR15 engine paint.
  4. BroncoJimbo

    What have you done to your Bronco today?

    I'd be proud of that work.
  5. BroncoJimbo

    600 cfm vs 500 cfm

    I ran a 600 CFM Holley on my 302 then 351W for years. I replaced it with a 470 TA and it has been flawless. I don't feel the need for bigger carb but then I'm just tractoring around anyway.
  6. BroncoJimbo

    What have you done to your Bronco today?

    Right after I bought my Bronco, I was driving down the 405 like I would my Honda CVCC and had to get on the brakes HARD. I learned then and there you need to plan your stops in the Bronco. And yes, you need to drive these like you are riding a motorcycle: head on a swivel and everyone is trying...
  7. BroncoJimbo

    Figured I should introduce myself rather than just start posting

    Good looking Bronco. I considered doing the Mustang EFI swap but then I moved out of California was finally able to register my Bronco. There are a few of us here from the old EBML days...
  8. BroncoJimbo

    Oil leak - pan or rear main seal?

    I like to try the cheapest/easiest solution first. Replace the pan gasket and see if that fixes it. My Bronco has so many engine and transmission leaks I just park it over cardboard.
  9. BroncoJimbo

    GIVEAWAY Giveaway - $200 gift card to Toms Offroad - Ends Fri Aug 22, 2025

    I'm in. The Bronco needs new seat covers and foam.
  10. BroncoJimbo

    20 years with this girl!

    I bought mine in 1990 right out of college and aside from the lift, wheels and soft top it still looks roughly the same as it did when I drove it home. I'm sure the guy I bought it from still tells people, "I had a Bronco, wish I hadn't sold it".
  11. BroncoJimbo

    SOLD 28 spline axles large bearings

    I don't want to scrap these if someone can use them. The splines are straight and the bearings are good. The reason I replaced them is the seal on the left axle has worn a groove and wouldn't seal. They might be able to be saved by polishing out the groove or by using a speedi-sleeve.
  12. BroncoJimbo

    What have you done to your Bronco today?

    I got a notice from the HOA when I had my MC trailer in the driveway for longer than they thought I should. Made up my mind right then I was not going to live in that environment. Sold the house a few months later and bought 5+ acres a few miles away. One of the best decisions we ever made.
  13. BroncoJimbo

    Headers on 351w.

    It's odd the James Duff listing omits 76-77 Broncos. I was checking since my old Duff's headers are getting a little crusty.
  14. BroncoJimbo

    Headers on 351w.

    I have a 351W with old James Duff chrome headers that I've run for 22 years. I use a GR starter but didn't have any issues with the stock style. I run two Flowmasters with pipes exiting at the rear quarters. I don't have a problem with heat from the floor even though there is just Durabak with...
  15. BroncoJimbo

    What have you done to your Bronco today?

    Got my new WH axles installed with SS hard brake lines and new shoes. I dreaded doing the rear brakes but if you figure out every way NOT to do them first... by the fifth time, you get it. The driveshaft had a broken center yoke so that was replaced along with all the u-joints and then a...
  16. BroncoJimbo

    CA Smog - I am stuck

    Back in the day, my friend owned a rental house in Arizona. He registered his modified Honda CRX there using that address. It didn't do him any good, the CHP pulled him over and gave him a fix-it ticket to get his car registered where he lived and worked. Like I said, the CHP is no joke.
  17. BroncoJimbo

    CA Smog - I am stuck

    I feel your pain. My '76 was unregistered for four of the seven years I had it in California. It was bone stock except for the dual exhaust with dual cats. Apparently, that was enough to prevent me from getting it smogged. I solved that problem by moving, strangely enough, to GA. As far as...
  18. BroncoJimbo

    What have you done to your Bronco today?

    Dropped off the housing Friday afternoon and it was ready before 8 AM Saturday. My welder said it was a factory defect and the years and miles (and abuse) eventually opened up the seam. All good now. He also checked my chunk and said gears and bearings were fine. That is a relief. On to paint!
  19. BroncoJimbo

    What have you done to your Bronco today?

    The hard part is done. The emergency brake cables fought me pretty good, but I didn't have to resort to a cut-oof tool, just the 14mm combo wrench (IYKYK). On to clean-up and then off to the welder. I'm also going to take my driveshaft to be balanced and have new u-joints installed. I'm going to...
  20. BroncoJimbo

    What have you done to your Bronco today?

    Finally got started on the rear axle. It looks like I might have a problem with the R&P due to water intrusion.
Top