Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
If you have problems registering or can't log into your account, please contact Admin.
My Advance Auto Duraspark rebuild has been working fine for 20 years and 70K miles now.
Good call on the rebuild/recurve @73AzBronco. I should probably send mine there for a spruce-up.
To the OP: I was where you are about 30 years ago. Stock 302 and power was meh...
You have been making good choices so far. Next up would be a free flowing exhaust (assuming it's stock) but after that besides gears ($$$) there is not a lot more you can do. The stock low compression 302 was never...
Holley Truck Avenger here. Just a 470 on a built 351W and it works great. It ran well out of the box but even better once I started the tuning process. Holley provides good support too. I considered the Q jet but I didn't like the funky adapter set-up.
Installed a new radiator. Did some research and although I can buy a cheap, no name, 3 core, aluminum radiator on eBay I bought a Champion radiator instead from Jegs. $256 delivered and it really is a thing of beauty. I hope it lasts longer than the last aluminum radiator I tried.
I was trying to figure out why I was only getting 6.5 MPG when I noticed I could no longer ignore the radiator leak. Pulled it and took it to the radiator shop on Monday. Just got a call and the radiator is beyond repair. Darn.
I'll walk right by a tarted up, overly modified, shiny painted, over-powered, "look-at-me" EB to look at a original paint, period-correct-modded, rusty, survivor. Especially if all the owner did was write big checks.
But maybe that's just me...
My 20 yr old Durabak is still sticking good but looks awful and holds dirt like crazy. When I used Monstaliner on my son's CJ5 I tried some over the Durabak. It is still sticking 5 years later so I was considering just going over the Durabak with Monstaliner
More expensive than paint but...
I've installed just the hub adapter so I can see what it is doing. I can put the adapter on and depress the spring-loaded pins but the relay will click if I push it all the way down (like the wheel nut was tightened). At this point I think I have a defective switch since I get continuity between...
I've had a Grant steering wheel on the Bronco since I bought it in 1990. Recently, I changed the TS switch out (the one I purchased in 2001 or so was broken) and now the horn is on all the time. I can get it to shut off by not putting the wheel on all the way but as soon as I snug it up it trips...
That used to happen to me quite a bit with my old 4160. I got pretty good at pulling the needle out and cleaning it on the side of the road. Solved that problem by going with a Truck Avenger. Has not happened since.
Me too. I am now very careful where I park it and I try to not let it out of my sight for very long. I guess it's time to call Hagerty and up the "agreed upon amount".
Had a guy pull up to me in traffic and shout a (lowball) offer to me. It's crazy.