• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

More HP from 302??

crashmc2

New Member
Joined
Mar 19, 2019
Messages
27
Loc.
Boise area
All valid points made.

I cruise at 2050 rpm at 70mph. Never shift going up a 6% grade that is miles long as we have them here.

With my 351W/ZF/203/D20 with 35"s I cruised at 2200rpm at 70mph. Of course I shifted down on hills. That's what transmissions are for right? lol I kept the same drivetrain and ran 37"s for almost a decade also. Shifting down on long hills didn't bother me at all. Getting 14.5 HONEST mpg checked against 8 other rigs on the same trip with a Qjet was always fun as it drove my EFI Bronco buddies crazy as I consistently at every fill up got better mileage and I had the largest cubes too.

I would drive 1,000 miles on a trip and not blink an eye doing it. No singing of gears wearing you, the driver down with a TON of racket for 8 hr days on the highway.

Pros & cons of everything. It's tough to weigh all the options w/o experiencing it first in an actual Bronco- for hours at a time. Otherwise it's not real. It's someone elses opinion and we know how different we all are. Some Bronco guys like sticks, some like LOUD exhaust, some like mud, some like uncut, you get the point. What's important to me isn't necessarily important to you.

Best of luck.
What's your axle ratio for that 351/ZF combo? My dad wants at least one more gear in his 77 F150 and refuses to look at an auto. I don't blame him, but he's got stock axle gearing (3.50). So the only way to keep the 1st gear performance anywhere near his NP435 is the ZF.

Sent from my SM-G975U1 using Tapatalk
 

BroncoJimbo

Contributor
Long-term owner
Joined
Jun 11, 2014
Messages
291
Loc.
North GA
To the OP: I was where you are about 30 years ago. Stock 302 and power was meh...
You have been making good choices so far. Next up would be a free flowing exhaust (assuming it's stock) but after that besides gears ($$$) there is not a lot more you can do. The stock low compression 302 was never a barn burner.
You never stated a budget so I would plan for an eventual 351W or crate motor and keep that in mind when purchasing components so they can be swapped over. In the meantime, read up on building small block Fords, buy a 351W and start rebuilding it little by little and when you are ready it will (mostly) drop right in.
 

mwilliams1623

New Member
Joined
Nov 2, 2019
Messages
2
Also to the OP...
I'm relatively new-ish to EBs...not so much to cars and Fords...but I understand how you feel and your concern. I drove a 66 Mustang with the original 289 and a 2 bl carb for a few years and felt a bit cheated when I got in to my EB with the 302, 3.50 gears and 33-inch tires. There has been some very good feedback from the experience of the users here, and I'm certainly going to follow a lot of it myself. I don't often contribute here, but feel this might help and keep you motivated without breaking your bank account, since it's clearly easier to write a check out of someone else's account, as many of us do when we offer advice;D. I've posted a video of my EB on the road this morning...click on the link below to get an idea of how this set-up drives...

Original 302 from 1973...best I can tell about 80k miles on the rebuild by the PO. I'm sure a 351 would be nice...but I'm focusing elsewhere with my budget since the 302 is running quite well now.
Recently rebuilt the Edelbrock 4bl myself with Edelbrock performer intake
Recently changed to 4.11 gears
Basic electronic ignition (not points)
33 inch tires
Mechanically stock otherwise...C4 trans, cam, exhaust manifolds (planning on changing to headers shortly), etc.


I'm a 43 year old dad of a couple boys (12 and 9) to give you some perspective on the approach for what I'm trying to get to with my EB. Either I or my wife drive/use it for a daily driver...sometimes 40+ miles one way for work (depending on the weather).

One thing I noticed was an overall performance improvement when I changed the air cleaner...very simple, obviously...but improving the air flow and ensuring a clean (rebuilt if necessary) carb with good timing, proper gearing ratio, etc has really improved the "seat of the pants" performance. I have no problem on the freeway as you can see in the video...yes the speedometer is accurate, and enjoy around town driving very much compared to when I first spent time behind the wheel. I used to get beat off the line by every 4 cylinder car out there. No, it's not a race car and I get passed like I'm not even moving when on the freeway...but you all can drive 80+ as much as you want. My 302 and I are perfectly happy cruising at 70-72 mph in the "slow" lane ;) with enough left over to pass the semis doing 65-70ish.

Hope this helps :)
 
Top