• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Search results

  1. LittleBeefy

    2023 Bronco Wheels for my 72

    Yes, you absolutely can do it. You will need to use BORA adapters which will cost you about $800 (don't use that Chinese sh!t under any circumstances!). Also you will need to bore out the center cap retainer for the front wheels so that your hub locks can fit through. Here is a set of forged...
  2. LittleBeefy

    New brake kits

    All brake pads sold in the US have edge codes printed on them. The edge code includes two letters. The first letter is low temp performance (200-400 degrees) and the second letter is high temp performance (300-650 degrees). The letters equate to the following friction coefficients: C= up to...
  3. LittleBeefy

    Weighing in on Edelbrock Proflo 4

    I love my Pro Flo on my 460. Runs like a Swiss clock. Highly dependable from day one. I would recommend it to anyone who asked. Plus it’s MPFI so it’s already a better design than the TBI setups it competes with.
  4. LittleBeefy

    Best Column replacement for an 88

    Auto column will work on a manual but not the other way around. Drilling it out to rekey it is a PITA so get one with a key if you can. Tilt and non tilt use different turn signal switches so if you already have a working switch try to find the model of column that matches what you already have...
  5. LittleBeefy

    New brake kits

    The clamping forces aren't flexing a cast caliper enough to move the pads a measurable distance. My point is more that moving the pad around without moving the piston in the same direction isn't going to have a net benefit on brake torque. Really, brake torque is best calculated using the radial...
  6. LittleBeefy

    New brake kits

    NERD ALERT: this is about to get into the physics weeds. I don't think moving the centroid of the pad further from the center of rotation would improve brake torque if the the piston did not also move the same direction and distance. I had to really think on it for a while to come up with a...
  7. LittleBeefy

    New brake kits

    I like the SSBC stuff too. I’m in the process of engineering a kit to use the SSBC 6 piston aluminum calipers for the front. It’s gonna be a beast and will look amazing when it’s done. Again, will fit Broncos from 66-79 with original knuckles, spindles and hubs, or you can reuse the GM stuff if...
  8. LittleBeefy

    New brake kits

    We have a rear brake kit on our website also, but it only fits the large bearing with 3.5” by 2.375” flange. We are looking at adding a complete Explorer kit as well. There are some really good brake kits out there for the rear already, but for the money, it’s hard to improve over the Explorer...
  9. LittleBeefy

    New brake kits

    We did another install over the weekend on a D44HP. The customer is very pleased with the additional braking power. Unfortunately he upgraded his booster and master cylinder at the same time and it appears that the booster he got is a Super Dooty, so he's getting that replaced before he can...
  10. LittleBeefy

    GA Tbird front calipers red powder coat

    T-bird calipers I bought from Duff a few years back. I had them powder coated red at Miller’s and rebuilt them in January with steel pistons. Have put 150 miles on them since then. They work fine, just replaced them with a Huge Brakes kit. Come with stainless DOT brake lines, speed bleeders...
  11. LittleBeefy

    New brake kits

    For those still following, here's our upgraded kit in red powder coat that I just installed.
  12. LittleBeefy

    New brake kits

    Very relevant points here. Mu is absolutely not constant in real world use of brakes, and heat is absolutely your enemy. Friction creates heat and brake fade is the result of heat lowering the the coefficient of dynamic friction and the grip that your pads have on your rotor. As @toddz69 points...
  13. LittleBeefy

    New brake kits

    Successful rickroll. Thanks for the laugh. I’m not sure on the difference between early, later and aftermarket pedal assemblies. Maybe someone with more experience on that can chime in. One other option is welding a lower brake rod attachment point on your existing pedal. That would lower...
  14. LittleBeefy

    New brake kits

    I don’t have the stock pedal ratio (or the stock pedal for that matter). I switched to hydroboost and installed a brake pedal from a 1997 SD to reduce my pedal ratio. The are interchangeable on the bracket (just hard to find).
  15. LittleBeefy

    New brake kits

    The problem you have is a combination of factors and so there are different ways to solve it. First, you have far too much mechanical advantage in the pedal so you are making up for it by reducing the hydraulic advantage in the MC (I’m sure you know that). That creates the second problem which...
  16. LittleBeefy

    New brake kits

    That makes sense now. Have you considered switch out your pedal assembly for one with a lower ratio?
  17. LittleBeefy

    New brake kits

    I am now very confused. 1 5/16” is an enormous bore. That’s what you would find on a 97 Suoer Duty which has dual 60mm pistons at all 4 wheels and hydro boost assist. Why do you need an MC with such a massive bore? What calipers are you running? Stock is 2 7/8” so 2” seems undersized. What...
  18. LittleBeefy

    New brake kits

    Bachelors and Masters in engineering from Georgia Tech. Geeky Engineering is my second language! I plan to have “Work = Force x Distance” put on my gravestone hahaha. Happy to help.
  19. LittleBeefy

    New brake kits

    You probably aren’t going to like my answer because it is pretty confusing and it will leave you with more questions but here goes. Brake torque is directly related to clamping force, the coefficient of dynamic friction (assuming the rotors are turning) and the radial distance of the clamping...
Top