• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Search results

  1. S

    77 9" swap question

    Couldn't find anything when I searched - I have a 69 bronco that I'm interested in swapping a complete drum to drum EB 77 9" into. Assuming the gearing is the same as my D44, will the 77 9" be a straight swap or is there anything that is different from the 69 9". Also, all 76-77 9" rears were...
  2. S

    SOLD factory buckets and brackets...dash out of 74

    interested in the seats, pm sent. thanks
  3. S

    Track (trac) Rise Bracket Options

    to the top
  4. S

    OH Complete 77 9" posi 3.50 or 4.10

    Would also consider any year EB complete 9" big bearing 3.50 or 4.10 posi but a '77 would be my first choice. Let me know if you have one. Thanks
  5. S

    73-75 upper PS shaft install question

    I was given a complete stock 73-75 (upper and lower) PS shaft that I would like to use rather than cutting my manual shaft and installing an after market joint that connects to the 73-75 PS box. I'd like to remove the manual shaft in my 69 without cutting it if possible. 1. Is it possible to...
  6. S

    Track bar???

    From BC's website: "We looked into using a heim joint on the lower also but found that if the jam nut slipped the bar would rotate and jam againsed the diff cover and either bend the track bar or the diff cover. The upper bushing is the one that usually goes bad and has the most stress on it."
  7. S

    Track (trac) Rise Bracket Options

    I decided on a track rise bracket but had a couple questions. First off, I have a 3.5" suspension lift and am doing the BC TRO heim steering set up with F150 knuckles and the BC adjustable track bar. I don't have all the equipment to make my own so I have to buy a track rise bracket. From the 3...
  8. S

    dana 44 swap question

    When upgrading my 30 to a 44, will the drive shaft on the 30 fit the 44 or do I need to find a shaft from a 44? Thanks
  9. S

    OEM power steering upgrade questions

    I'm upgrading my 69 302 manual 3 speed with a 73-75 OEM system. I have researched it thoroughly on this site and others but was unable to find a couple things. 1. I know that I need the 2 piece steering shaft from a 73-75. Are the 73-75 PS 2 piece shafts any different between manual and...
  10. S

    Your expertise/advise/tips would be much appreciated

    Thanks Whoaa. All the above info is extremely helpful. And now I've got some more follow-up questions With a 3 1/2 lift, if I bought an aftermarket trac bar will I be able to get rid of the current trac bar lowering bracket that is currently on it without needing to add a trac bar riser to...
  11. S

    Your expertise/advise/tips would be much appreciated

    Thanks for all the advise/tips. It's very helpful. I recently moved from the west coast to Columbus, OH. I'll work on getting some pics up of my bronco. A couple questions to follow-up with Reminder - I've got '69 with a 3 1/2" inch suspension lift, stock power steering out of a '73 and a...
  12. S

    Your expertise/advise/tips would be much appreciated

    Warning: Long post This is my first post so please take it easy on me. I finally took the plunge after over a decade of drooling over EB's and bought myself a '69 302 with a 3 speed on the floor, 3 1/2 suspension lift and 33" tires. And of course after I got it, I started researching upgrades...
Top