• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Search results

  1. S

    Are Fox body Mustang seats a good candidate for a Bronco?

    Another thing to consider when adding the 69 mustang headrests to your stock EB seats. On the passenger side, because of the increased height with the 69 headrest, the seat likely won’t clear the dash to tumble forward. It will still fold forward but won’t tumble for back seat access. A guy on...
  2. S

    How to remove hood spring latch

    I tried a couple times with a large flat head screwdriver bit on an impact. It ended up just bending the bit. So I ground two sides for a large pair of vise grips to get a good grip on it. Worked well.
  3. S

    Smittybilt roll bar B pillar foot plate dimensions and hole spacing

    Was wondering if anyone has these. I’m upgrading to a full cage and going to try to tie my B pillar tubes into my old smittybilt. Unfortunately I no longer have the roll bar to measure myself and the previous owner drilled some extra holes in my floor in that area. The plates I’m looking for are...
  4. S

    Pics of underside hood brace for clearance

    Would appreciate some pics/ideas of how people have modified the underside brace/s for clearance. Not interested in an aftermarket fiberglass hood (have one currently that I want to replace) or hood scoops. I added some pics of how Shannon’s broncos modifies theirs for coyote engine clearance...
  5. S

    Attaching Wild Horses Rock rails to frame

    Really appreciate all the pics and reply’s, thank you
  6. S

    Attaching Wild Horses Rock rails to frame

    Jim - do you have some detailed pics of the gussets welded in place that you recommend and also pics of them bolted in place and the front and back?
  7. S

    Explorer EFI - 3.8 Cam Sync Custom Collar... Group Buy?

    I’ll take one. Thank you!
  8. S

    Help Identifying these flares

    Can anyone identify these flares just from this single pic? They have small indentations on the edge for fastener placement/spacing that I believe WH Gorilla warflares don’t have but I could be wrong. Guy selling them says that they are flexible plastic material. TIA
  9. S

    CA Body Panels

    PM sent on the Highlander hood
  10. S

    Stock track bar frame bracket mounting width?

    Thanks all for the help
  11. S

    Stock track bar frame bracket mounting width?

    Searched but nothing came up that listed the inside mounting width. Anyone have one they can measure for me? I know the 66-75 and 76-77 were different brackets but I believe they both have the same mounting width for the track bar. Thanks in advance. Below is a pic I found online of the stock...
  12. S

    Extended length I/2”-20 T Bolts for disc brake conversion

    Instead of welding new axle flange ends on my 77 9” housing, I welded the holes in a set of explorer disc caliper brackets, ground the welds flat and then machined new holes for the old style big ford pattern to fit the 1/2-20 T-bolts. I overlooked checking to see if they made longer T-bolts...
  13. S

    Extended length I/2”-20 T Bolts for disc brake conversion

    I’ll give Jbg a call on Monday, thanks. Anyone else know of any other potential options?
  14. S

    Extended length I/2”-20 T Bolts for disc brake conversion

    Searched here and online with no luck. There are multiple companies that sell extended length 3/8”-24 T-bolts but no 1/2”-20. Anyone have a source/part number/etc? Thanks in advance.
  15. S

    CA ISO Boxwood Green Sheet Metal

    Appreciate the tips. I'll send Gupster a message, thanks.
  16. S

    CA ISO Boxwood Green Sheet Metal

    Long time lurker, don’t post much. Finally getting to the body on my 70 original paint boxwood green U15. Hate to be that guy but what’s the harm in asking (besides shame). Ideally looking for original paint boxwood green but will consider everything including new paint/re-paint boxwood green...
  17. S

    Door complete re-built / re-assemble instructions?

    Bump. Also need to do this soon and would like to do it right the first time (famous last words of course).
  18. S

    AZ 76-79 F150 4x4/78-79 Bronco power steering box housing

    I’ll take it Todd. How much is a flat rate box shipped to 93110? Thanks!
  19. S

    Stainless Axle Breather Vent Bolt

    Thanks Jon! Sent you an email
  20. S

    Stainless Axle Breather Vent Bolt

    Did some searching for this but couldn’t find one. Anyone have a link to one? Backstory: I have removed the 7/16-20 threaded axle vent breather bolt from quite a few D44’s and 9” axle housings and most of them were corroded/rusted on the inside of the tube to the point of falling apart. I...
Top