• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Search results

  1. Cmaxx252

    Ignition trouble

    I really appreciate the response. I'll match these diagrams and let you know. Thanks again. Cody
  2. Cmaxx252

    Ignition trouble

    Hey guys, I've finally made it to the point of getting the engine fired up on the run stand. The problem im having is as soon as I turn the key from lock to "run" it will crank over and fire up, but starter will stay engaged. Am I missing something elementary here? I've wired the ignition...
  3. Cmaxx252

    What have you done to your Bronco today?

    Finished setting up the engine run stand. Cerakoted the headers, installed v belt. installed correct starter for manual bell housing. Primed oil system, made a few rotations by hand. Troubleshooting the no crank issue currently. Should be able to fire and break in engine this weekend.
  4. Cmaxx252

    Fuel Pick up location frame mount pump

    Thank you sir. Took a lot of notes on this one. Cody
  5. Cmaxx252

    Fuel Pick up location frame mount pump

    Interesting. I hadn't thought of doing that on a carb set up, but will look into it now. So you can still regulate pressure down at the carb to ~6 psi. but back at the filter with a return port, whatever isn't being moved towards the carb is circulated back to a return port or filler neck inlet...
  6. Cmaxx252

    Fuel Pick up location frame mount pump

    Exactly. I know the frame mounted low pressure pumps are not perfect for creating vacuum, and more head pressure is ideal. I also didn't want to risk having the pump or line torn off if it were plumbed into the "drain" location. I will go with a lower micron pre pump, element replacement...
  7. Cmaxx252

    Fuel Pick up location frame mount pump

    Thanks Gents. Lars, you're right on the tank manufacture. Wild horses use to carry them. I just called my father to confirm again and asked if it was toms or wildhorses (foggy memory) He said wild horses actually. Are you using it with an efi setup or frame mounted fuel pump? I'm going to try...
  8. Cmaxx252

    Fuel Pick up location frame mount pump

    Hey Doug, My father is the one who put the tank in. Its the Kit from Tom's Bronco (23 gal tank). That low point seemed like it should be a drain to me also. And.. kind of in a vulnerable spot to have plumbing, or a fuel pump that low. I was searching for other users you ran their plumbing from...
  9. Cmaxx252

    Fuel Pick up location frame mount pump

    Im replacing the fuel line from the 23 gal tank to the carb. The previous owner had it hard piped in from the bottom of the tank (see arrow #1). On the tank is it painted 'fuel pickup" (arrow #2) in a higher location. Is this location suitable for a gravity feed frame mounted pump like the...
  10. Cmaxx252

    CA 72 stock drums/hubs/warn locking hubs

    Not sure what they're worth. If anyone knows someone needing these for a resto let me know. Nothing wrong with them, just went to disc conversion. Locking hubs worked with no issues.
  11. Cmaxx252

    What have you done to your Bronco today?

    Installed the Tom’s disc brake conversion. Ordered a 50oz flywheel and clutch from a local store.
  12. Cmaxx252

    engine vibration

    What flywheel did you end up purchasing?
  13. Cmaxx252

    Crank/balance identification

    I wouldve preferred that for sure. When the original 302 was pulled, he donated it to the junkyard for a 5.0 out of a mustang. With all of the accessories still bolted to it :-/. luckily, the trans and transfer case were already out of the bronco and in storage so I still have those. This...
  14. Cmaxx252

    Crank/balance identification

    10-4 thank you. The short and logical answer im thinking is, go with the casting numbers identified on the crank, with it being 50oz, and get the correct flywheel to match it. My balancer is adjustable so i can add the weight bars for 50oz.
  15. Cmaxx252

    Crank/balance identification

    I'll try to keep the back story short. The engine that came with my bronco (rebuilt and on an engine stand) does not have a spec sheet. My father (the one who purchased the engine years ago) lost the spec sheet. The engine came with no balancer or flywheel. What he does remember from the add...
  16. Cmaxx252

    What have you done to your Bronco today?

    Finished cleaning up the new rear end, new spring perches, welded brackets to locate the brake lines, new pinion seal, bent new brake lines, painted and put in.
  17. Cmaxx252

    Comment by 'Cmaxx252' in media 'April 2023'

    Is this with the 2.5 springs on the front?
  18. Cmaxx252

    What have you done to your Bronco today?

    Thank you sir, I cant take credit though. I dont even know the paint code. When we bought the bronco it was this color. I'll eventually paint it white :) She's got some rough corners and hail damage from the previous owner.
  19. Cmaxx252

    What have you done to your Bronco today?

    Got it moved to the new house finally, pulled the Dana 60 out. Swapped the tires onto the new rims, got it on jack stands.
Top